A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0-9

Results 11 - 20 Of 745 ‹ Previous 1 2 3 4 5 6 7 8 9 10  Next › 

NIVUS GmbH
	DataCont FWU The DataCont FWU is preferably used as a data logger to log mechanical, metrological and electro technical equipment in rain basins, pump stations or other technical facilities. Among others water levels, flows, pulse times and error messages can be logged and recorded. The analog inputsâ storage behavior as well as the internal digital outputsâ switching behavior can be controlled by limit value modules/timer modules. The data report can be carried out on-site with a laptop via an RS 232 interface. By using the corresponding NIVUS software the data (protocols and progress lines) can be edited, archived, displayed graphically and printed with a PC. When coordinating several decentralized measurement points by a main station the data are transmitted via the telephone network. Error messages as well as data thus can be transmitted automatically.Using a rechargeable battery buffer (optional) with the modem, an error message will be transmitted safely even in case of a mains failure. This is carried out either via the fixed phone network (analog modem â optional) or via radio transmission (GSM modem â optional). Upcoming error messages can be divided to up to eight phone numbers. Transmission by City-Call and/or SMS (D1 or D2) is possible too. In the main station error messages can be printed. The NIVUS software NivuDat or the NIVUS process conducting system NICOS make the DataCont FWU remote controllable. Optional basin purification facilities can be driven by using a software module. NivuCompact Measurement range from 0.15 to 10 m Digital echo processing Linearisation View echo profiles on PC Simple menu navigation Integrated keypad Unit programming without opening the enclosure High acoustic power with narrow beam angles Temperature compensation as standard NivuScope Sludge Level, Interface and Sludge Profile Capture No moving parts, no wear Interface and sludge level capture, independent of density Large display for sludge level and progression up to 24 hours Menu driven programming and HELP screens No recalibration required Worldwide Service Fully automatic purification function for extreme requirements available See where sludges deposit in liquids or where sedimenting substances are: NivuScope makes your basins and containers transparent. In opposite to electromechanical / optical measurement devices the NivuScope captures interfaces or density alternations independent of the absolute density. Hence, it is possible to safely determine the topmost interface e.g. in secondaries and to prevent the sludge from „overflowing“. This protects our waters and ensures operators to safely operate their facilities according to the high environmental requirements. Something similar applies to the sludge stock in the secondary. Here, it must be made sure that the sludge level does not fall below its minimum. Typical Applications: Waste Treatment Clarifiers Primaries and Secondaries, Gravity Thickeners Raw Water Clarifiers Sludge Settling Basins, Filters Flue Gas Desulphurisation Facilities Settling Tanks Aluminium Industry Filter Tanks and Thickeners Paper Industry Flotation Plants Mining Washing Construction Materials Purifying Plants Industry/Chemical Industry Heavy Metal Separation Sedimentation Monitoring Brine Tanks, Crystal Growing OCM Pro CF Suitable for MCERTS applications very high accuracy measures the real flow velocity profile spatial allocation of single velocities cross correlation with digital pattern detection absolutely stable zero point and drift-free no electrodes, no conductivity required measures in all channels, part filled and full pipes and flumes measures in heavily polluted and abrasive media no external calibration required suitable even for very difficult applications easy installation without additional constructions Ex approval for zone 1 as ATEX very easy parameter setting in multilingual dialog mode large, back-lit graphic display stores complete measurement data on Compact Flash card online connection/data transmission and remote maintenance via Internet
Phoenix Contact GmbH & Co. KG
	Industrial Connection Technology CLIPLINE From the terminal block through the assembly material and practical tools to the complete PC-supported configuration and making system, you will find everything required for the perfect control cabinet. Industrial Connectors PLUSCON You face the challenge of finding out how to save even more time and costs with system installations. We provide a modern and comprehensive program of industrial connectors for all applications.
Oxford Instruments Oy
	1020 CS Cryo Cooler The cold temperatures achieved by cryocoolers are used in many applications in materials research, aerospace simulation, signal detector cooling radio astronomy, cell phone repeater towers. Cryo-Plex 10 Cryopump Generally considered the most efficient cryopump design the 10” ANSI / 14” OD Conflat achieving double the gas and water volume of the CP-8 cryopump, providing clean, oil free high vacuum pumping solutions. . Standard applications: Semiconductor, Aerospace & vacuum coating as well as R&D. Flexible Configurations Standard inlet array configurations available as ANSI, ISO,Conflat ® and full UHV. Power a single or two CryoPlex – 10 cryopumps with the M600 Helium Compressor reducing space, power and maintenance making this and ideal package for large chamber applications requiring multiple cryopumps. Industry Standard Designs Austin Scientific Cryo-Plex cryopumps and compressors are fully compatible and interchangeable with the Helix Cryotorr ® line of cryopumps and compressors making upgrades and repair exchanges seamless. HyperSenseÂŽ - the in-vitro DNP Polariser HyperSense allows the user to drive NMR sensitivity to levels never seen before. The sensitivity improvements attainable with 13C, 15N, 29Si and 31P have the potential to increase the breadth of Nuclear Magnetic Resonance (NMR) experiments and your applications. Examples are: Shorter data collection times and/or the use of much smaller amounts of sample material Benefits of quaternary carbons that will improve structure confirmation and elucidation. This could provide more reliable NMR spectral assignments in a shorter time The ability using direct detection of š³C to identify complex biomixtures in metabonomics Using the enhanced signal to carry out chemical kinetic experiments HyperSense configures easily with your laboratory and existing spectrometer X-METÒ5000 - A Rugged Hand-held XRF Analyser Engineered for high performance and reliability, this hand-held XRF analyser combines Oxford Instruments’ patented PentaPIN® detector technology offering guaranteed fast analysis and lower limits of detection for all elements of interest. Built for the most demanding quality control applications: scrap metal sorting - analysis of metals for PMI - consumer products for RoHS screening - lead in toys compliance testing - ore exploration in mining processes - heavy metal monitoring in soils The X-MET5000’s major strength is the Light Element Treatment (LET) mode, enabling fast and accurate analysis of heavy elements, even when the sample contains light elements like Aluminum and Silicon. This is not possible when using fundamental parameters (FP) on an analyser that does not detect light elements. This rugged and reliable tool is IP54 (NEMA 3) approved for superior dust and splash protection. The X-MET5000 is perfect for the harshest environments. The battery's operating time of one working day is unique and enables extended productivity without returning to base. The powerful user programmable software delivers highly accurate results for reliable Go/No-Go decisions. The X-MET5000 will identify material type and automatically choose the best XRF analysis method.
H2NS Environmental Inc
	DataLink-CEM Environmental Data Acquisition Software - Continuous Emissions Monitoring / Process Monitoring FEATURES: Windows 98/NT™ Operating System Easy To Use Open Data Structure Real Time Data Reduction, Validation and Presentation Flexible Reporting and Data Analysis Tools CEMS, 40CFR 60, 64, 503 PEMS and Parameter Monitoring Graphical Data Presentations Interfaces to, H2NS-CPP-3794, Odessa DSM Series Remote Modem Access Realizing today's ever evolving environmental regulations have placed increasingly more complex data acquisition and reporting requirements on the non-scientific user, H2NS is pleased to present DataLink. This software program is flexible and extremely easy to use. The Windows NT™ operating system is the system of choice for mission critical applications in industry. Realizing that not all applications require all the bells and whistles our software is capable of, we have modularized the package so the user can select the module best fitting his application and budget. DataLink contains four separate modules. They are: Configuration Explorer which is essentially the system configuration such as channel assignments, alarms, etc., Scheduler, which is the summary report setup for manual or automatic generation of reports, Data Monitor, which is the display of real time data and alarms with the capability to print summary reports. Data Explorer, coupled with Data Monitor, provides a complete data acquisition, alarming and reporting package. Data Explorer can export data or save reports to file. For CEM applications, DataLink is designed to give operators a real time picture of their process. The data acquisition device is polled and the displays are updated as fast as each 5 seconds. This real time compensation, averaging, calibration results and data validity determination informs the operator of an impending problem so that corrective action can be taken before they develop. The alarming and real time tracking allows for archiving and entry of reasons and actions codes. Data is displayed in either trend or tabular format. The Windows NT™ operating system ensures true pre-emptive multi-tasking, Data are collected at all times regardless of data analysis or report generation activity. All data collected by DataLink is stored in an open database structure. this typically consists of quarterly Microsoft Foxpro 3.0 Database files. DataLink can also be interfaced with corporate database systems such as Oracle™ and Microsoft SQL-Server™. Data may also be exported to Microsoft Excel or Microsoft Access. DataLink incorporates a variety of reports including: excess emissions, analyzer downtime or out of control periods. Required regulatory, pre-formatted reports, are only a mouse click away. The "ad-hoc" query tool allows for complex queries of the database. This tool allows the user to select the criteria for any type of report, generate it, and output it to an external data base( Excel, Access, etc). Reports also may be output to a printer, Lotus spreadsheets, the resident database or simply as text files. DataLink allows for the full range of data retrieval, data archiving, data editing, calibration reports, alarming, and real time data display. Pre-formatted regulatory reports are standard. The "ad-hoc" report feature is standard. The New Jersey state regulatory reports are automatically produced. Other state reports are in process of development. Also coming soon is the automatic preparation of the new reports required under the "NOX Budget Program". These reports will be transferred to the applicable regulatory agency be electronic means. Environmental Monitoring and Meteorological Studies H2NS Environmental Inc. is pleased to present DataLink/AQM,-RT a truly new concept for environmental monitoring and meteorological studies. DataLink/AQM-RT incorporates the latest technologies while maintaining tradition for the tenured environmental professional. H2NS has added an exciting, new capability, to this proven package of Data Acquisition Software. This package allows for automated and manual polling of an H2NS CPP-3794, plus a variety of other manufacturers data loggers, either by direct connect or telephone modem. In the Real Time mode, operators can view data in a variety of formats with updates as frequent as 10 seconds. Retrieved data is stored in a data base that can be edited and exported to popular spread sheets such as Access? or Excel?. Data analysis includes tabular summary reports with a max-min, interval average and total summary. Presentations include trend charts, bar graphs tabular and graphical reports. Graphical reports include wind rose, pollution rose and 3D graphs. DataLink/AQM-RT takes all the hassle out of configuring the software to match the specific data logger configuration. Using DataLink/AQM-RT you simply connect to a data logger and DataLink-RT commands the logger to download it’s configuration. The configuration is saved as unique to that location. DataLink also allows reset of the logger time to match the computer time or allows the logger to reset the computer time. H2NS Environmental Presents the CPP-4794 - The Next Generation Serial Data Collection The CPP-4794 represents the next generation of data logging and offers serial interfacing to instruments as well as supporting the traditional analog approach using an analog to digital converter. Over a single RS-232 cable, the CPP can collect data, status and control the calibrations of connected instrumentation. This approach simplifies wiring, documentation and increases system reliability. In those instruments that support a time/date download, the CPP keeps the entire system time synchronized. Pass Through to Instruments The CPP-4794 also offers an unabated pass through mode that allows a user to make a direct connection with an instrument that is connected to the CPP, passing signals through the CPP, unabated. This allows manufacturer supplied diagnostic routines to be conducted on instruments from a remote location, e.g., your facility or even the instrument manufacturer’s facility. The CPP continues to collect data from all other connected instrumentation. 12 Independent Serial Ports Up to 12 independent serial ports can be installed in the CPP. One serial port is used for an on site operator, another is used to communicate and transfer data to a central polling facility. The remainder of the serial ports can be used to interface to instrumentation. One of the ports can be used to provide a Modbus output from the CPP, or other special protocols, as needed. Data Storage/Security The battery backed, internal memory in the CPP can store over 3,000 data values for ten channels. For hourly averages, this translates into 3,000 hours of data for ten channels. However, given all that can happen at a remote location such as power surges, brownouts, lightning, and operator mishaps, the CPP also offers data storage on a 64meg, industrial grade, Compact Flash Memory Card. This provides an additional degree of buffering from circumstances that can affect data collected and stored on site. Years of hourly data can be stored on the Compact Flash Memory Card.
SULO Umwelttechnik GmbH & Co.KG
	City Furniture Litter bin in accordance with DIN 30713 ICEBERG Underground Systems The ideal solution for every project More room for importand things: Our comprehensive selection of ICEBERG Underground Systems enables the underground collection of high quantities of waste and recyclables, creating space for a clean and attractive environment: Refuse collection containers Container systems for environmentally friendly waste management Today, environmental awareness and avoiding residual waste are subjects that gain more and more importance and the demands on waste management are ever increasing. The neat separation of waste and recyclables has been considered a fact of life for some time now. SULO offers the different container systems required to deal with the present and future demands in waste management. Waste bins Material and construction Injection moulded from specially designed plastic Capacity: 45 litres Handling Plastic handle that widens in the middle for easy carrying Handle is lockable in three positions Integrated wheels and extendable handle make transporting easy Hinged lid with easy grip handle For individual marking the lid can be imprinted Ouality Constant quality control through own laboratory
Thermo Fisher Scientific
	DataRAM 4 Portable Particle Sizing Dust Monitor With the DataRAMTM, you`ll never have to wait for laboratory results to assess whether airborne pollutants have reached dangerous levels. The DataRAM real-time aerosol monitor measures mass concentrations of airborne dust, smoke, mist, haze, and fumes, while providing continuous real-time readouts of both air temperature and humidity. Large capacity onboard datalogging capability lets you save concentration data for future Environmental Our broad array of solutions to make the world a healthier, cleaner and safer place. We provide chemical analysis laboratory instruments and a range of dedicated air quality and water analysis products. We also offer radiation detection, measurement and security instrumentation. Our expanded product capability now includes Barnant water and air/gas sampling pumps. Whether your work is in the lab or in the field, we have the solution. Radiation Measurement & Protection We supply the nuclear industry, DOE National Laboratories, national and international safeguards organizations, defense and law enforcement agencies with the most complete line of instrumentation and systems on the market today. The New Standard of Particle Technology Engineers, physicists, chemists, biochemists, and other scientists use microparticles as reference standards for size measurements, as flow tracing devices, for molecular biology, and nucleic acid isolation applications, as reactive surfaces to transport diagnostic reagents and for a variety of other uses. Our customers depend on Thermo Scientific microspheres to solve real-world problems.
Ohmex Limited
	Radio Telemetry Modems The 'LR' and 'SR' modems are new range of digital radio telemetry systems to complement the Ohmex Tide Gauge and Weather station products, housed in a robust IP67 aluminium cases the modems are suitable for use in licence free Marine applications worldwide. The LR radios use a spread spectrum technology to avoid interference and provide clear data communications between modems at baud rates up to 115.2 Kbps. The SR radio system use 20 channels within the open license free EU radio frequencies The radios can be set up in secure Master, Slave or Repeater modes providing 'Point to Point' and 'Point to Multipoint' network combinations. SonarMite Echo Sounder The SonarMite Echo Sounder is the result of nearly two years research and development to further extend the boundaries of shallow water hydrographic surveying equipment. The introduction by Ohmex in 1997 of the SonarLite, the worlds first truly portable echo sounder system, has been a hard act to follow and it remains the portable instrument of choice in many survey companies around the world. The release of the SonarMite instrument marks the next stage introducing a series of equipment designed around the WinSTRUMENT concept using the latest portable computers integrated with new measurement technologies. SonarMite Software - Trimble Versions The SonarMite software provides a complete hydrographic package for datalogging and display facilities for the SonarMite echo sounder used with a wide range of positioning devices. Versions of the software have been ported to various Trimble devices, special software features included in this version of the SonarMite software include a parser to work with positions generated by the ATS range of robotic total stations used in machine control and automated construction applications. Trimble ACU WinCE.net Port Ohmex have ported the SonarMite echo sounder software to the Trimble ACU controller and data collector used on a wide range of Robotic Total Stations, RTK GPS systems and rover detail poles. The ACU incorporates the Windows® CE.NET operating system, a graphical touch screen display and Bluetooth communications technology. The resulting unit provides a compact cable-free or on-board instrument controller and data collection solution. The ACU is specifically designed to attach to Trimble field sensors, it clips directly on to Trimble 5600/3600 Total Stations, 5600/5800 RTK GPS systems and robotic/RTK rover poles. The ACU is powered by the instrument or the robotic/RTK rod holder. The internal battery provides up to three hours of stand-by operation. Environmentally rated to IP54 and temperature ranges from –20°C to +55°C the ACU is able to withstand a drop of 0.90 m making it rugged enough for most field applications. TideM8 - Modular Bluetooth Tide Gauge System TideM8 is the current replacement for the popular TidaLite portable tide gauge. Using the latest low power processor and flash memory technology, the new design offers precise calendar and time keeping functions together with solid state data retention. The TideM8 is designed to interface directly to external displays or computers using serial communications with Bluetooth, the Ohmex Short and Long range radio telemetry modems and a range of dedicated LCDs for simple remote display of numeric data. Trimble SCS900 Hydrographic extensions The concept of the Sonar extension to SCS900 is to enable the construction user to execute simple Hydrographic surveys using their SCS900 software together with existing positioning equipment, no need to learn another package or convert to new reporting facilities, the sonar effectively behaves as an extension to the existing survey detail pole for measuring water depth
Vaisala instruments
	Vaisala CARBOCAPÂŽ Carbon Dioxide Transmitter Series GM20 Versatile transmitters Duct and wall mount models Incorporates the Vaisala CARBOCAPÂŽ sensor - the silicon based NDIR Excellent long-term stability Negligible temperature dependence Easy to install Five year recommended calibration interval Vaisala HUMICAPÂŽ Humidity and Temperature Transmitter Series HMT330 Top-of-the-line model for demanding industrial applications. A large numerical and graphical display. A fully configurable transmitter. Optional data logging and (W)LAN interface. Vaisala SPECTRACAPÂŽ Oxygen Transmitter OMT355 An optical, diode laser based oxygen analyzer for industrial gas measurements. Minimizes need for sample conditioning equipment. In-situ probe or sampling cell options. Tolerates aggressive chemicals. Tolerates excessive amounts of moisture even in liquid form. Low maintenance. Diagnostic output for preventive maintenance. Heated optical surfaces to prevent condensation. Vaisala Weather Transmitter WXT520 (replaces WXT510) Measures 6 most essential weather parameters as WXT510 Accurate and stable Low power consumtion - works also with solar panels Compact, light-weight Easy to install No moving parts Vaisala Configuration Tool for PC USB connection Housing with mounting kit IP66 Applications: weather stations, dense networks, harbors, marinas
Jenway
	9200 Dissolved Oxygen Meter IP67 The Model 9200 Dissolved Oxygen Meter is designed and constructed to resist the harshest of field, laboratory and industrial environments. The whole system is waterproof to IP67, and if dropped into water will float. These products are ideal for on-site water quality measurement in a multitude of customer applications. The 9200 utilises a Clark type polarographic membrane electrode optimised for both speed fo response and ... Aquanova Jenway offer a wide choice of instruments to suit all budgets and applications requirements in environmental monitoring. Outlines below are the Models available. In order to obtain additional descriptive information and specification details please select the appropriate product. For details of other Environmental instruments, please see the following sections: pH Meters, Conductivity Meters, Flame Photometer and Fluorimeter Conductivity Meters Automatic range selection for optimum resolution Automatic or Manual calibration 32 reading data storage Conductivity and TDS modes Power on self-test routine 500 hours battery life Supplied with FREE carry case click to enlarge The Model 470 Conductivity/TDS Meter is a general purpose hand held meter offering a wide measuring range, which is further complimented by the auto-ranging function that ensures results are displayed with the highest resolution that can be achieved. Calibration can be carried out automatically against standard solutions at 10ÂľS, 84ÂľS, 1413ÂľS and 12.88mS or a manual calibration can be made against any other standard value Flame Photometer Low temperature, single channel for Industrial & Clinical analysis Sodium & Potassium with Li, Ba & Ca options Electronic ignition Flame failure safety system Fine & coarse sensitivity controls Operates on propane, butane, natural gas or L.P.G. supplies click to enlarge The Models PFP7 and PFP7/C are low temperature, single channel flame photometers designed for the routine determinations of Na & K (Ca, Ba and Li optional). With in-built automatic flame failure detection for user safety these products are ideal for use in clinical, industrial and educational applications. The Model PFP7/C is specifically designed for use in clinical applications. The in-built lineariser circuitry enables readings of both Na and K at the normal clinical serum concentrations to be displayed directly in mmol/l. Serum samples must be diluted 200:1 or 100:1 prior to presentation to the flame photometer. The Series 7 diluter is available to enable this to be carried out efficiently and accurately. Fluorimeters Total Energy Transfer (TET) system for maximum sensitivity Create and Save secure methods Intelligent Filter Modules (IFM) ensure correct filters are fitted Raw fluorescence and Concentration values displayed Calibration against up to 6 standards possible Kinetic (timed reading) functions Electrically heated sample holder and sipper pump options Compatible with DataWay PC software click to enlarge Three models are available to cover a wide range of applications. Choose the Model 6280 for the most sensitive determinations with emission wavelengths up to 650nm. Where higher emission wavelengths will be experienced choose the Model 6285 with its red-enhanced detector. For less sensitive applications with a broader range choose the low cost Model 6270. All three models offer intuitive operation with a user interface based on logical menus that can be navigated from the simple keypad. Up to 20 methods can be created without restriction and be saved for future use. They can also be locked against accidental change by password entry, ensuring data integrity. Spectrophotometer Ranges 6715 Scanning, UV/Visible range 190-1100nm, 1.5nm bandwidth Jenway offer a wide choice of spectrophotometers to suit all budgets and applications requirements. Outlines below are the Models available. In order to obtain additional descriptive information and specification details please select the appropriate product.
GE Analytical Instruments - a division of GE Water & Process Technologies
	GE Analytical Instruments Expands Portfolio of Deployable Technologies for Process Optimization BOULDER, COLORADO, April 8, 2008 — GE Water & Process Technologies has acquired the assets of Sensicore, Inc., a developer of smart, hand-held sensor systems for measuring and monitoring water quality in the field. Sensicore will become a unit of GE Water’s analytical instrumentation division, GE Analytical Instruments, based in Boulder, Colorado. Sensicore’s proprietary hand-held WaterPOINT testing tool focuses on the municipal market and is designed to improve water quality and plant operations at every step in the water treatment process. WaterPOINT uses silicon sensor chips to provide a complete profile of 18 critical water tests in minutes, enabling municipalities to better manage resources and quickly respond to changing conditions. The company also offers the WaterNow online data network that helps users understand this data through unique visualization and comparison tools. “Sensicore has developed a hand held field deployable instrument that offers a combination of electrochemical, physical, and colorimetric technologies for measuring water quality in real time,” said Dr. Michael W. Routh, General Manager, GE Analytical Instruments. “This differentiated approach compliments our existing portfolio of deployable instrumentation and builds on our strategy to facilitate real time process optimization by providing immediate, at-site feedback.” GE Analytical Instruments develops and markets a range of lab, on-line, and portable instruments and sensors for process management, including Total Organic Carbon (TOC) analyzers and sensors that provide real time measurements for making critical process and quality decisions in the pharmaceutical, semiconductor, and municipal markets. GE Analytical Instruments Products GE Analytical Instruments combines advanced microchemistry, molecular and atomic physical measurement, along with superior engineering, to achieve the most sensitive laboratory and process control instrumentation available. The world's leading manufacturer of instruments used to measure total organic carbon (TOC) in water, we also offer other innovative analytical instrumentation solutions for a wide range of applications and analysis. Our product brands include Sievers and Leakwise. SieversÂŽ World leading TOC analyzers and sensors for organic analysis in ultrapure, municipal quality, and waste waters focusing on pharmaceutical, semiconductor, municipal, power generation, industrial process, environmental, and wastewater applications. The world's only on-line boron analyzer, possessing low part-per-trillion sensitivity and providing continuous monitoring and protection in microelectronics and power applications. Industry standard nitric oxide analyzer serving the medical research community in the development of diagnostic strategies for a variety of diseases. LeakwiseÂŽ Breakthrough technology providing environmentally sensitive applications with the most reliable and accurate means to detect and measure oil on water and oil spills. For more information about our products, please select your area of interest: • TOC Analysis • Boron Analyzer • Nitric Oxide Analyzer (NOA) • Standards • Leakwise Oil-on-Water Monitoring Systems • Sensicore WaterPoint 870 Water Quality Analyzer • Parts and Accessories • Software InnovOx Laboratory TOC Analyzer Measures Thousands of TOC Samples - All Day, Every Day The new Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer represents a true breakthrough in high TOC measurement technology and reliability. The InnovOx (short for innovative oxidation) can consecutively handle thousands of common—as well as difficult samples such as brine and cellulose—with unprecedented system uptime. The InnovOx offers unparalleled oxidation robustness, a dynamic linear working range of 0.5 to 50,000 ppm, and calibration curve stability for industrial waste and environmental or process water samples. Supercritical Water Oxidation (SCWO) Technique GE Analytical Instruments' patent-pending Supercritical Water Oxidation (SCWO) technique enables the InnovOx to achieve its superior analytical performance and unsurpassed calibration stability. Using an oxidation process in a super critical state has shown superior TOC recoveries across a broad range of organic compounds and particulate impurities. This new process removes sample and precipitated impurities between each analytical run, eliminating sample matrices contamination and providing reliable, long-term system performance. Versatile Measurement Modes With the InnovOx, analysts can routinely test for Total Carbon (TC), Total Inorganic Carbon (TIC), Total Organic Carbon (TOC), and Non-Purgeable Organic Carbon (NPOC). The InnovOx software provides versatile analysis options such as multiple runs on the same sample, auto calibration range selection, and integration with the Sievers 900 Autosampler. Leakwise Oil on Water Detection and Monitoring Systems With the Leakwise product line, GE Analytical Instruments has broadened its water quality measurement capability with break-through technology to monitor oil on water. As environmental concerns mount regarding our global water resources, Leakwise oil on water measurement systems provide state of the art solutions for the early detection and mitigation of water pollution events. Oil refineries, seaport authorities, water municipalities and power generation facilities represent a few of the industries benefiting from Leakwise technology. The Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. (Click here to see a 4-minute presentation on the Leakwise system.) The Leakwise product family includes: ID-221 Oil Sheen Monitoring System — Hydrocarbon on water detector for sumps (wet), tanks, ponds, and groundwater wells ID-223 Oil Sheen Monitoring System — Hydrocarbon on water detector for sumps (wet and dry), ponds, and canals ID-225 Oil Thickness Monitoring System — Hydrocarbon layer thickness monitor for oil/water separators, groundwater wells, sumps (wet), tanks, and ponds ID-227 Oil Sheen Monitoring System for Marine Applications — Hydrocarbon on water wave rider detector for marine offshore applications, lagoons, lakes, rivers, open canals, and large retention ponds ID-227 WL Wireless Oil Spill Detection System for Marine Applications — Wireless hydrocarbon detection and monitoring for on and offshore applications Nitric Oxide Analyzer (NOA 280i) The Sievers® Nitric Oxide Analyzer (NOA 280i) offers the most versatile detection system for Nitric Oxide (NO) analysis. Employing GE Analytical Instruments' highly sensitive, ozone-chemiluminescence technology, the NOA 280i has unsurpassed versatility for liquid and exhaled breath NO measurement. With over 700 publications using the Sievers Nitric Oxide Analyzer, the NOA has proven to be the instrumentation of choice by researchers worldwide. For detailed information on the 280i NOA, please click here or on the main navigation menu above. UPW Boron Analyzer Your View of Boron is About to Change . . . With a limit of detection of 15 parts-per-trillion boron and up to 10 samples per hour, continuous boron monitoring in ultrapure water has just become very affordable and remarkably convenient. The Sievers UPW Boron Analyzer even exceeds ICP-MS performance (see Progress Report on New On-line Boron Analyzer Research), and does it at a fraction of the cost. A true "plug-and-play" instrument, the boron analyzer can be installed in less than an hour, requires no skilled or trained operator, and provides the sensitivity and accuracy of ICP-MS or on-line Ion Chromatography. A built-in multiplexor even allows for monitoring of up to four sample streams with customizable settings for each stream. Where is the Sievers UPW Boron Analyzer being used? At the outlet of primary mixed-resin beds. Boron is released from these beds prior to silica (see Boron-related technical papers), and continuous monitoring of bed effluent provides operators with the earliest indication of changing bed conditions and bed exhaustion. At the outlet of polishing resins. The earliest indicator of polishing resin exhaustion, and a potential contaminant in wafer processing, real-time boron data from the polishing bed effluent is critical to today's advanced fabrication facilities. At the outlet of Electrodeionization units. A well-run EDI balances power consumption against contaminant removal. Boron is weakly ionic, and is a critical indicator of EDI performance (see two technical papers by Steve Chen). Regeneration processes. An expected source of boron in any UPW system is regenerated resins. Boron specifications for regenerated resins help ensure the lowest possible boron loading of UPW systems, thus minimizing future regenerations and polish resin contaminant loading. For detailed information on the Boron Analyzer, please click here or on the main navigation menu above.