A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0-9

Results 1 - 10 Of 757 1 2 3 4 5 6 7 8 9 10  Next › 

ABB Automation GmbH
	Calmaster Calmaster has been introduced in response to demands from the water industry for traceable in-situ flow meter verification. Calmaster performs a complex series of tests, which ensure correct functionality and calibration of the flow meter. A simple to follow Windows interface guides the user through the automated series of tests. On completion a certificate is produced to comply with regulatory requirements. Calmaster can be used on existing Magmaster installations but with a reduce accuracy. Magmaster with a factory fingerprint will be given a certificate of 1% existing Magmasters without a factory fingerprint will be given a 2% certificate. Verification accuracy +/- 1% Fully portable battery operated hardware Help desk support at Calmaster@gb.abb.com FCU200-T (SensyCal-T) The FCU200-T (SensyCal T) is a two-channel energy, mass flow and volume counter. The device is designed to convert either direct current to a proportional pulse frequency or a proportional pulse frequency to a direct current. The following process signals can be connected on device 2 active current signals or 2 active pulse/frequency signals 2pulse output Graphic display with background light. The key day function, data logger and the MBUS, MODBUS and Profibus (over converter) communications are for further processing. Oxygen and Combustibles Analyzer The Type SMA Smart Analyzer 90 is a microprocessor based industrial grade combustion analyzer that continuously samples and analyzes industrial flue gases (oxygen only or optional oxygen and combustibles).The analyzer is designed for use on gas, oil or coal fired combustion processes and has a high temperature operating range.Typical applications include those found in the utility and petrochemical industries. Sensyflow FMT200-ECO2 Sensyflow FMT200-ECO2 is a very compact and extremely dynamic mass flow meter for air. It offers a direct mass or standard volume flow measurement in pneumatic applications, e.g. in paint robot control. A multi-variable connection system makes the Sensyflow FMT200-ECO2 easy to install in many different tubes or pipes. Analog and digital output signals allow for flexible signal processing. Compact design (IF Design award) Variable process adapters: tubes, threads, ISO-KF flanges DN25 Variable, adjustable output signals Measuring range 1..100 kg/h (=12....1250 l /min) Serial port RS 232 Variable Area Flowmeter VA Master FAM540 The flowmeter operation is based on the variable area principle. They can be utilized for measuring the flow of liquids, steam and gases, especially when aggressive or opaque fluids are to be metered. They are indispensable where high pressure and/or high temperature operating conditions exist. The stainless steel primaries as well as the PTFE liner primaries are proven in many applications even under hardest conditions. Primary instrument designs: FAM541 Standard-line with flange connections FAM544 Hygienic design FAM545 with PTFE-liner for aggressive fluids FAM546 with Steam jacket for temperature sensitve fluids All devices are available as analog indicator with or without alarms as well as electronic transmitter with 4-20 mA , HART and NAMUR contact outputs and optionally with a graphical display. They can be used in all hazardous areas in flameproof, intrinsic safety or non sparking design.
3m
	Eye Protection As a trusted supplier of Respiratory and Hearing Protective Equipment, we understand that achieving a good fit between different pieces of Personal Protective Equipment may sometimes prove difficult. That’s why we decided to extend our existing range of safety solutions to include safety spectacles and goggles. Our aim is to make your eyewear selection easier by offering a selected range of high quality, stylish and comfortable products that are suitable for a variety of hazards and are designed to be worn in conjunction with Respiratory and Hearing Protective Equipment. Hearing Protection Hearing Protection Protective Coveralls 3M, a world leader in Personal Protective Equipment, now offers a range of protective coveralls to complement its range of Respiratory, Hearing, Head and Eye protection products and provide broader safety solutions to its customers. 3M have a select range of high quality stylish Protective Coveralls offering breathable comfort and protection you can rely on. With the high level construction quality, the range gives peace of mind for effective use and protection against many industrial hazards. Respiratory Protection Sweeping, sanding, grinding, painting, spraying, welding -- each creates a unique set of demands... The wide selection of 3M Respiratory Protective Equipment helps you to protect yourself in a wide range of work environments. 3M offers you the widest range of maintenance free particulate respirators and powered-air and supplied-air respirators for the widest range of industrial applications, with unequalled pedigree, gained in the toughest conditions. This range offers all the comfort of refreshing, moving air and possibilities of integrating your protection. Spill Management 3M™ Sorbents can be used in a wide variety of applications ranging from simple maintenance to emergency spill clean-up. Sorbents help ensure your workplace is kept clean and safe and reduce damage to the environment. 3M sorbents are designed to be used for specific jobs and materials. Some can be used for general maintenance applications while others are designed to handle petroleum or chemical spills and clean-up. Thermal Imaging Camera The 3M™ Thermal Imaging Camera FF 131 (TIC) is built specifically for the demanding fire fighting environment, to provide reliable, high definition imaging. Combining advanced detector technology with innovative, task-oriented mechanical design, it is completely self-contained, with no external cables or components to catch or impair movement. Features Large Display High Definition VOx Microbolometer Four colour palettes (Grey Scale, Autumn, Full Colour, Infotherm) Thru-the-lens digital temperature measurement Auto Focusing Lens Easy and intuitive operation Viewable when crawling. Visibility Whether at work or play, Scotchlite™ Reflective Products from 3M help you be seen at dawn, dusk, or night, in all weather conditions. 3M™ Scotchlite™ Reflective Materials use a technology known as retro reflection. Retro reflection occurs when light rays are returned in the direction from which they came. Making sure you stay safe and seen.
Daimler Chrysler AG
	Energy Professional implement-carrier, powerful hauling vehicle, mobile workshop: the Mercedes-Benz Unimog is all of the above in one vehicle. And thus able to cover all demands of an effective energy industry fleet. It does not matter whether you are opening up new energy sources, working in open-cast mines or in charge of maintaining and servicing extensive power supply lines. Thanks to its unique chassis and implement-carrying design, the Unimog always arrives at the difficult off-road worksite, quickly and without having to take any detours, even when fully loaded. Especially when there is a breakdown within the power supply network – the Unimog is there,. without having to reload other vehicles. It takes the crew, measuring equipment, tools and materials directly to the problem site, thus the crew can invest its time at the site and not getting there. Better performance, lower costs: the calculation works to your advantage. local authorities vechicles Mowing, winter service, maintenance and up-keeping, cleaning, hauling and loading jobs. Nowhere else like in towns and communities are the road and grounds maintenance requirements so diverse. To handle all of these tasks, a large fleet of vehicles including equipment would be required. Or one vehicle that is specialised for a wide variety of jobs from the very beginning: just like the Mercedes-Benz Unimog. Better driving comfort and implement operation than a truck, faster and lower fuel consumption than any tractor, and almost infinite customising possibilities – no series produced vehicle can match that. With the Unimog you always operate at optimum. A special Unimog feature developed for manifold operations is the VarioPilotÂŽ steering. Simply move the steering column from the left hand to the right hand side of the cab. Thus you can accomplish numerous jobs in cost-effective one-person-operation. Exchanging implements and mounting bodies is also accomplishes in a trice – thanks to the Unimog’s quick-change-system. And if you want to be even more efficient, thanks to the outstandingly flexible implement-carrying design, you can carry out several operating processes in a single run. For instance with the tripple-mowing combination. Thus you are able to lower your costs and utilise the Unimog 365 days a year. Everything but normal day-to-day work: life-threatening situations such as floods, mud slides or extreme heavy snow fall, with the Unimog you are able to operate and offer assistance in the hardest worst-case scenarios. The Mercedes-Benz Unimog is irreplaceable Unimog To accept any challenge and to cope with it perfectly. Only one vehicle can do this: the uniquely versatile Unimog U 300/U 400/U 500. And what makes this professional implement-carrier over 7.5 t gross vehicle weight different from all other commercial trucks? Versatility at its best. It can be equipped much more individually than any other series-produced vehicle. Plus, the Unimog is perfectly suited to work off-road. With a top speed of 89 km/h, on the road, it leaves every tractor behind. And with its engine power reserves you can rely on the Unimog’s dependability. A professional for professionals, who demand outstanding performance combined with absolute cost-effectiveness for all-year-around operations.
Vaisala instruments
	Vaisala CARBOCAPÂŽ Carbon Dioxide Transmitter Series GM20 Versatile transmitters Duct and wall mount models Incorporates the Vaisala CARBOCAPÂŽ sensor - the silicon based NDIR Excellent long-term stability Negligible temperature dependence Easy to install Five year recommended calibration interval Vaisala HUMICAPÂŽ Humidity and Temperature Transmitter Series HMT330 Top-of-the-line model for demanding industrial applications. A large numerical and graphical display. A fully configurable transmitter. Optional data logging and (W)LAN interface. Vaisala SPECTRACAPÂŽ Oxygen Transmitter OMT355 An optical, diode laser based oxygen analyzer for industrial gas measurements. Minimizes need for sample conditioning equipment. In-situ probe or sampling cell options. Tolerates aggressive chemicals. Tolerates excessive amounts of moisture even in liquid form. Low maintenance. Diagnostic output for preventive maintenance. Heated optical surfaces to prevent condensation. Vaisala Weather Transmitter WXT520 (replaces WXT510) Measures 6 most essential weather parameters as WXT510 Accurate and stable Low power consumtion - works also with solar panels Compact, light-weight Easy to install No moving parts Vaisala Configuration Tool for PC USB connection Housing with mounting kit IP66 Applications: weather stations, dense networks, harbors, marinas
Jenway
	9200 Dissolved Oxygen Meter IP67 The Model 9200 Dissolved Oxygen Meter is designed and constructed to resist the harshest of field, laboratory and industrial environments. The whole system is waterproof to IP67, and if dropped into water will float. These products are ideal for on-site water quality measurement in a multitude of customer applications. The 9200 utilises a Clark type polarographic membrane electrode optimised for both speed fo response and ... Aquanova Jenway offer a wide choice of instruments to suit all budgets and applications requirements in environmental monitoring. Outlines below are the Models available. In order to obtain additional descriptive information and specification details please select the appropriate product. For details of other Environmental instruments, please see the following sections: pH Meters, Conductivity Meters, Flame Photometer and Fluorimeter Conductivity Meters Automatic range selection for optimum resolution Automatic or Manual calibration 32 reading data storage Conductivity and TDS modes Power on self-test routine 500 hours battery life Supplied with FREE carry case click to enlarge The Model 470 Conductivity/TDS Meter is a general purpose hand held meter offering a wide measuring range, which is further complimented by the auto-ranging function that ensures results are displayed with the highest resolution that can be achieved. Calibration can be carried out automatically against standard solutions at 10ÂľS, 84ÂľS, 1413ÂľS and 12.88mS or a manual calibration can be made against any other standard value Flame Photometer Low temperature, single channel for Industrial & Clinical analysis Sodium & Potassium with Li, Ba & Ca options Electronic ignition Flame failure safety system Fine & coarse sensitivity controls Operates on propane, butane, natural gas or L.P.G. supplies click to enlarge The Models PFP7 and PFP7/C are low temperature, single channel flame photometers designed for the routine determinations of Na & K (Ca, Ba and Li optional). With in-built automatic flame failure detection for user safety these products are ideal for use in clinical, industrial and educational applications. The Model PFP7/C is specifically designed for use in clinical applications. The in-built lineariser circuitry enables readings of both Na and K at the normal clinical serum concentrations to be displayed directly in mmol/l. Serum samples must be diluted 200:1 or 100:1 prior to presentation to the flame photometer. The Series 7 diluter is available to enable this to be carried out efficiently and accurately. Fluorimeters Total Energy Transfer (TET) system for maximum sensitivity Create and Save secure methods Intelligent Filter Modules (IFM) ensure correct filters are fitted Raw fluorescence and Concentration values displayed Calibration against up to 6 standards possible Kinetic (timed reading) functions Electrically heated sample holder and sipper pump options Compatible with DataWay PC software click to enlarge Three models are available to cover a wide range of applications. Choose the Model 6280 for the most sensitive determinations with emission wavelengths up to 650nm. Where higher emission wavelengths will be experienced choose the Model 6285 with its red-enhanced detector. For less sensitive applications with a broader range choose the low cost Model 6270. All three models offer intuitive operation with a user interface based on logical menus that can be navigated from the simple keypad. Up to 20 methods can be created without restriction and be saved for future use. They can also be locked against accidental change by password entry, ensuring data integrity. Spectrophotometer Ranges 6715 Scanning, UV/Visible range 190-1100nm, 1.5nm bandwidth Jenway offer a wide choice of spectrophotometers to suit all budgets and applications requirements. Outlines below are the Models available. In order to obtain additional descriptive information and specification details please select the appropriate product.
GE Analytical Instruments - a division of GE Water & Process Technologies
	GE Analytical Instruments Expands Portfolio of Deployable Technologies for Process Optimization BOULDER, COLORADO, April 8, 2008 — GE Water & Process Technologies has acquired the assets of Sensicore, Inc., a developer of smart, hand-held sensor systems for measuring and monitoring water quality in the field. Sensicore will become a unit of GE Water’s analytical instrumentation division, GE Analytical Instruments, based in Boulder, Colorado. Sensicore’s proprietary hand-held WaterPOINT testing tool focuses on the municipal market and is designed to improve water quality and plant operations at every step in the water treatment process. WaterPOINT uses silicon sensor chips to provide a complete profile of 18 critical water tests in minutes, enabling municipalities to better manage resources and quickly respond to changing conditions. The company also offers the WaterNow online data network that helps users understand this data through unique visualization and comparison tools. “Sensicore has developed a hand held field deployable instrument that offers a combination of electrochemical, physical, and colorimetric technologies for measuring water quality in real time,” said Dr. Michael W. Routh, General Manager, GE Analytical Instruments. “This differentiated approach compliments our existing portfolio of deployable instrumentation and builds on our strategy to facilitate real time process optimization by providing immediate, at-site feedback.” GE Analytical Instruments develops and markets a range of lab, on-line, and portable instruments and sensors for process management, including Total Organic Carbon (TOC) analyzers and sensors that provide real time measurements for making critical process and quality decisions in the pharmaceutical, semiconductor, and municipal markets. GE Analytical Instruments Products GE Analytical Instruments combines advanced microchemistry, molecular and atomic physical measurement, along with superior engineering, to achieve the most sensitive laboratory and process control instrumentation available. The world's leading manufacturer of instruments used to measure total organic carbon (TOC) in water, we also offer other innovative analytical instrumentation solutions for a wide range of applications and analysis. Our product brands include Sievers and Leakwise. SieversÂŽ World leading TOC analyzers and sensors for organic analysis in ultrapure, municipal quality, and waste waters focusing on pharmaceutical, semiconductor, municipal, power generation, industrial process, environmental, and wastewater applications. The world's only on-line boron analyzer, possessing low part-per-trillion sensitivity and providing continuous monitoring and protection in microelectronics and power applications. Industry standard nitric oxide analyzer serving the medical research community in the development of diagnostic strategies for a variety of diseases. LeakwiseÂŽ Breakthrough technology providing environmentally sensitive applications with the most reliable and accurate means to detect and measure oil on water and oil spills. For more information about our products, please select your area of interest: • TOC Analysis • Boron Analyzer • Nitric Oxide Analyzer (NOA) • Standards • Leakwise Oil-on-Water Monitoring Systems • Sensicore WaterPoint 870 Water Quality Analyzer • Parts and Accessories • Software InnovOx Laboratory TOC Analyzer Measures Thousands of TOC Samples - All Day, Every Day The new Sievers InnovOx Laboratory Total Organic Carbon (TOC) Analyzer represents a true breakthrough in high TOC measurement technology and reliability. The InnovOx (short for innovative oxidation) can consecutively handle thousands of common—as well as difficult samples such as brine and cellulose—with unprecedented system uptime. The InnovOx offers unparalleled oxidation robustness, a dynamic linear working range of 0.5 to 50,000 ppm, and calibration curve stability for industrial waste and environmental or process water samples. Supercritical Water Oxidation (SCWO) Technique GE Analytical Instruments' patent-pending Supercritical Water Oxidation (SCWO) technique enables the InnovOx to achieve its superior analytical performance and unsurpassed calibration stability. Using an oxidation process in a super critical state has shown superior TOC recoveries across a broad range of organic compounds and particulate impurities. This new process removes sample and precipitated impurities between each analytical run, eliminating sample matrices contamination and providing reliable, long-term system performance. Versatile Measurement Modes With the InnovOx, analysts can routinely test for Total Carbon (TC), Total Inorganic Carbon (TIC), Total Organic Carbon (TOC), and Non-Purgeable Organic Carbon (NPOC). The InnovOx software provides versatile analysis options such as multiple runs on the same sample, auto calibration range selection, and integration with the Sievers 900 Autosampler. Leakwise Oil on Water Detection and Monitoring Systems With the Leakwise product line, GE Analytical Instruments has broadened its water quality measurement capability with break-through technology to monitor oil on water. As environmental concerns mount regarding our global water resources, Leakwise oil on water measurement systems provide state of the art solutions for the early detection and mitigation of water pollution events. Oil refineries, seaport authorities, water municipalities and power generation facilities represent a few of the industries benefiting from Leakwise technology. The Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. (Click here to see a 4-minute presentation on the Leakwise system.) The Leakwise product family includes: ID-221 Oil Sheen Monitoring System — Hydrocarbon on water detector for sumps (wet), tanks, ponds, and groundwater wells ID-223 Oil Sheen Monitoring System — Hydrocarbon on water detector for sumps (wet and dry), ponds, and canals ID-225 Oil Thickness Monitoring System — Hydrocarbon layer thickness monitor for oil/water separators, groundwater wells, sumps (wet), tanks, and ponds ID-227 Oil Sheen Monitoring System for Marine Applications — Hydrocarbon on water wave rider detector for marine offshore applications, lagoons, lakes, rivers, open canals, and large retention ponds ID-227 WL Wireless Oil Spill Detection System for Marine Applications — Wireless hydrocarbon detection and monitoring for on and offshore applications Nitric Oxide Analyzer (NOA 280i) The Sievers® Nitric Oxide Analyzer (NOA 280i) offers the most versatile detection system for Nitric Oxide (NO) analysis. Employing GE Analytical Instruments' highly sensitive, ozone-chemiluminescence technology, the NOA 280i has unsurpassed versatility for liquid and exhaled breath NO measurement. With over 700 publications using the Sievers Nitric Oxide Analyzer, the NOA has proven to be the instrumentation of choice by researchers worldwide. For detailed information on the 280i NOA, please click here or on the main navigation menu above. UPW Boron Analyzer Your View of Boron is About to Change . . . With a limit of detection of 15 parts-per-trillion boron and up to 10 samples per hour, continuous boron monitoring in ultrapure water has just become very affordable and remarkably convenient. The Sievers UPW Boron Analyzer even exceeds ICP-MS performance (see Progress Report on New On-line Boron Analyzer Research), and does it at a fraction of the cost. A true "plug-and-play" instrument, the boron analyzer can be installed in less than an hour, requires no skilled or trained operator, and provides the sensitivity and accuracy of ICP-MS or on-line Ion Chromatography. A built-in multiplexor even allows for monitoring of up to four sample streams with customizable settings for each stream. Where is the Sievers UPW Boron Analyzer being used? At the outlet of primary mixed-resin beds. Boron is released from these beds prior to silica (see Boron-related technical papers), and continuous monitoring of bed effluent provides operators with the earliest indication of changing bed conditions and bed exhaustion. At the outlet of polishing resins. The earliest indicator of polishing resin exhaustion, and a potential contaminant in wafer processing, real-time boron data from the polishing bed effluent is critical to today's advanced fabrication facilities. At the outlet of Electrodeionization units. A well-run EDI balances power consumption against contaminant removal. Boron is weakly ionic, and is a critical indicator of EDI performance (see two technical papers by Steve Chen). Regeneration processes. An expected source of boron in any UPW system is regenerated resins. Boron specifications for regenerated resins help ensure the lowest possible boron loading of UPW systems, thus minimizing future regenerations and polish resin contaminant loading. For detailed information on the Boron Analyzer, please click here or on the main navigation menu above.
Casella Group
	Air Quality Monitoring Many applications exist where there is a requirement for monitoring ambient or outdoor air quality with respect of Particulates (PM10, PM2.5) gases and solvents or Polyaromatic Hydrocarbons PAH’s. Local and national governments often establish regional or national networks of monitoring stations, whilst industrial processes such as landfill, construction / demolition operations may require monitoring data to evaluate their impact on the local environment. Systems come in a variety of enclosures and configurations and may be located on site boundaries, by roadsides for traffic pollution monitoring, or in rural locations to establish background pollution levels. Air Sampling Range of personal air sampling pumps and accessories for undertaking personal exposure monitoring of airbourne dusts, fumes vapour and solvents in accordance with national government health and safety legislation and guidelines. All pumps are fully accredited for use for sampling and undertaking risk assesments to HSE-MDHS, EH40, NIOSH and other national sampling methodologies. For use by professional Industrial Hygienists, Occupational Health Safety and Environment managers. Indoor Air Quality With many people spending up to 90% of their working life indoors, it is important to monitor the Indoor Air Quality (IAQ). Parameters of special interest are Temperature, Humidity, Air Velocity, CO, CO2 and Ozone. Regular monitoring ensures compliance with WHO guidelines and can help reduce work related sicknesss or Sick Building Syndrome (SBS). Noise Noise instruments for either monitoring workplace or environmental noise. Noise is monitored in the workplace to protect an employee from hearing loss. This can be done by personally worn products (dosimeters) or hand held sound level meters. The selection of the required hearing protection can also be performed via the use of these instruments. VORTEX Ultra Flow The problem of asbestos is still with us and is the subject of stringent legislation for its removal and disposal. The requirement for quick sample collection and counting of airborne fibre in the shortest time possible means a far higher flow rate than with more conventional sampling methods is required. The VORTEX Ultra Flow is designed with this application in mind but also retains the portability of personal samplers.
Challenge Technology
	AER-200 Respirometer The AER-200 Respirometer can be used for both aerobic and anaerobic wastewater applications. The AER-200 Respirometer is designed for batch and laboratory applications. When you use the AER-200 Respirometer, here's what you get: The widest range of oxygen uptake rate measures...as low as 0.06 mg/hr and as high as 600 mg/hr...wide enough to meet any of your applications. The widest range of detection for anaerobic gas production ... from 0.05 ml/hr to 1,500 ml/hr. Highly accurate flow measurement...you can "trust" the data you generate. Easy data collection...the computer does the work. the data can be used directly or exported to your spreadsheet or other data processing programs. Data collection flexibility...intervals can be set from 1 minute to 720 minutes to meet your needs You know exactly where you are in each test from on-screen tabular and graphical indications of the test progress...no more guessing on your part. An easy-to-set up respirometer system...modular design allows you to use only the components to meet your needs. Flexibility...you can use reactor volumes ranging from less than 50 ml to 20 l or larger. More flexibility...you can use different reactor configurations during any test set up. And more flexibility...you can run aerobic and anerobic tests simultaneously on one system. An easy-to-use respirometer system...you minimize set up time by using standard laboratory glassware...you reduce cleanup time because grease is not required to seal the reaction vessels...you can withdraw gas or liquid samples from the reaction vessels at any time during a test. User Friendly Software...WindowsTM-based software presents data as cumulative oxygen uptake and oxygen uptake rate when operating in the aerobic mode and cumulative gas production and gas production rate when operating in the anaerobic mode. Training to use the system is easy...almost anyone can do it. AER-200S Soil-Compost Respirometer The Challenge AER-200S Soil/Compost Respirometer is ideally suited to determine rates of oxygen uptake or anoxic gas production rates in soil or compost samples - as may occur in upper layers of soil under natural conditions or in mixed compost reactors. The AER-200S Soil/Compost Respirometer can provide useful information for determining steps in soil bio-remediation. Many companies are developing products that assist or increase the degradation rate of toxic chemicals. This unit can provide quick and easy quantitative data to support such claims. This unit can also help municipal and industrial sites that need to understand the gas production rates of the dried solids. This objective is accomplished with a perforated sample column in a sealed reactor column. Soil Column Specifications Soil, Compost, and Bio-Solid testing equipment must overcome two important principals: Stagnant air gradients and temperature control. Challenge created a convenient two chamber system to do just that. Reactor Column: The reactor chamber allows for a headspace around the entire sample and allows for maximum surface area resulting in maximum oxygen uptake rates. Sample Column: The sample column serves three major functions. The base of the sample column is a unique magnetic coupled fan that works in conjunction with the MS-300 Magnetic Stirrer. This feature allows the air to be circulated in and around the sample without injecting or removing air from the reactor eliminating stagnant atmosphere gradients.The sample column is a perforated cylinder that allows for maximum surface-to-reactor contact. The sample column cap functions as the KOH well for carbon dioxide absorption for measurements or anaerobic measurements when methane values are required. Click here for the AR-295 Diagram. The AER-200S uses easy and reliable luer fittings for all connections. The need for messy greases and special configurations are eliminated. This system can measure aerobic and anaerobic reactions very easily by changing the position of two connections at the measuring cell. The reactor column has two ports purging the head space. Stirring speeds are unified across all samples with a single control dial. Temperature control is critical for any respirometric study, so Challenge Technology recommends the use of either a temperature controlled environmental chamber or a heater/cooler and water bath such as the H/C-230 and W/C-200. The W/C-200 sits on the stirrer base without compromising magnetic stirring efficiency. The H/C-230 is then used to circulate the water throughout the entire bath to maintain consistent and stable temperatures. Challenge recommends a circulating heating/cooling unit for uniform temperature as opposed to immersion heaters that can produce pockets of differing temperatures. The AER-200S is available in a 4-Reactor set and 8-Reactor Set. For individuals already owning the AER-200 Respirometer, the Soil/Compost Column can be ordered individually (AR-295). For more information about the measuring system and capabilities see the AER-200 Aerobic/Anaerobic Respirometer MS-300 Magnetic Stirrer A key component to respirometric testing is the oxygen transfer limit. So, Challenge Technology experimented with many stirrers, but found that all the stirring units available could not reach the high speeds required without the risk of spin-off and possibly nullifying an entire test. So, Challenge set out to create the best multi-position stirrer available. OLR-300 On-Line Respirometer The OLR-300 On-Line Respirometer is a true "on-line" respirometer which gives oxygen uptake rates for treatment plant operations.
Enviro Technology Services plc
	Air Quality Monitoring Enviro Technology Services has been designing and building air quality monitoring systems and networks since 1983. Pictured here is a professional air quality monitoring station comprising: API M100e UV fluorescent SO2 analyser API M200e Chemiluminescent NOx analyser API M300e IR Absoption CO analyser API M400e UV Absoption O3 analyser BAM1020 Beta-attenuation particulate analyser (PM10, PM2.5 or TSP) Synspec GC 955-600 BTX analyser API M700 Dynamic dilution calibrator API M701 Zero-air unit OPSIS DL256 Datalogger Yokagowa digital chart recorder Continuous Air Quality Monitoring Systems (CAMS / AQM) Air quality analysers for the measurement of all of the major air quality pollutants, particulates and trace gasses. These include SO2, NOx, NO2, O3 and CO as well as volatile organic compounds (voc), other hydrocarbons, mercury and many other organic and inorganic compounds. Particulate PM10 / PM2.5 instruments measure continuously, using ether beta attenuation or teom analyser techniques. Particulate samplers include high, medium and low volume to meet all requirements for portable and fixed installations. Air quality monitoring instruments and analysers can be integrated into complete systems and housed in climate controlled analyser houses or shelters suitable for all environmental conditions. A range of high and medium volume samplers are also available for TSP and chemical sampling (i.e. PCBs Dioxins & Furans). Particulate bound nitrates and sulphates can also be sampled using the advanced URG 9000-A analyser. Read the latest news and press releases about CAM/AQM and Enviro Technology or view the products by selecting a sub category below... Continuous Emissions Monitoring Systems (CEMS) Enviro Technology offers a wide range of continuous emissions monitoring (CEM) equipment from simple single-component analysers through to project-engineered, application specific turnkey CEMS such as energy-from-waste and power plant monitoring. Where possible, the non-contact, MCERTS approved OPSIS cross-duct CEM system is offered. Using UV and IR DOAS analysers, the OPSIS CEM system can measure multiple gases such as NO NO2 SO2 CO CO2 HCL HF in near real-time from between 1 and 6 monitoring points. Based on optical cross-duct technology, no part of the analysis system comes into contact with the process gas ensuring highly reliable operation and the lowest possible amount of operator involvement, maintenance and calibration. Enviro Technology is proud to have supplied the OPSIS system to several Blue Chip companies, some of which have standardised on OPSIS for all their CEM monitoring requirements, nationwide. Other CEM systems available include the OPSIS LD500 laser diode cross-duct monitoring system for ultra-fast response process control applications and the OPSIS M1040 / M1050 Chemiluminecent NOx and UV Fluorescent SO2 analysers based on the reliable and proven dilution extraction principle. The latest introduction to the range is the PowerMan 400 dilution extractive system that measure NOx as standard with O2 CO SO2 H2O CO2 and Hg as options. PowerMan 400 is designed primarily for combustion plant CEM applications. Help us help you by completing our Continuous Emission Monitoring Questionnaire Read the latest news and press releases about CEMs and Enviro Technology or view the products by selecting a sub category below... Stack Testing Equipment Enviro Technology has recently expanded it's product range to include a range of stack testing equipment from the Italian manufacturer Zambelli SrL. The Zambelli Model 6000 Isolplus samples thermodynamic parameters and updates flow-rate in real time. Wil simultaneously sample gases and vapours in compliance with BS ES 1911; dust to BS ES EN 13284, BS ISO 9096 and BS ISO 12141 and dioxins and furans to BS EN 1948. May also be configured to automatically monitor stacks/ducts having different sections and sizes.
H2NS Environmental Inc
	DataLink-CEM Environmental Data Acquisition Software - Continuous Emissions Monitoring / Process Monitoring FEATURES: Windows 98/NT™ Operating System Easy To Use Open Data Structure Real Time Data Reduction, Validation and Presentation Flexible Reporting and Data Analysis Tools CEMS, 40CFR 60, 64, 503 PEMS and Parameter Monitoring Graphical Data Presentations Interfaces to, H2NS-CPP-3794, Odessa DSM Series Remote Modem Access Realizing today's ever evolving environmental regulations have placed increasingly more complex data acquisition and reporting requirements on the non-scientific user, H2NS is pleased to present DataLink. This software program is flexible and extremely easy to use. The Windows NT™ operating system is the system of choice for mission critical applications in industry. Realizing that not all applications require all the bells and whistles our software is capable of, we have modularized the package so the user can select the module best fitting his application and budget. DataLink contains four separate modules. They are: Configuration Explorer which is essentially the system configuration such as channel assignments, alarms, etc., Scheduler, which is the summary report setup for manual or automatic generation of reports, Data Monitor, which is the display of real time data and alarms with the capability to print summary reports. Data Explorer, coupled with Data Monitor, provides a complete data acquisition, alarming and reporting package. Data Explorer can export data or save reports to file. For CEM applications, DataLink is designed to give operators a real time picture of their process. The data acquisition device is polled and the displays are updated as fast as each 5 seconds. This real time compensation, averaging, calibration results and data validity determination informs the operator of an impending problem so that corrective action can be taken before they develop. The alarming and real time tracking allows for archiving and entry of reasons and actions codes. Data is displayed in either trend or tabular format. The Windows NT™ operating system ensures true pre-emptive multi-tasking, Data are collected at all times regardless of data analysis or report generation activity. All data collected by DataLink is stored in an open database structure. this typically consists of quarterly Microsoft Foxpro 3.0 Database files. DataLink can also be interfaced with corporate database systems such as Oracle™ and Microsoft SQL-Server™. Data may also be exported to Microsoft Excel or Microsoft Access. DataLink incorporates a variety of reports including: excess emissions, analyzer downtime or out of control periods. Required regulatory, pre-formatted reports, are only a mouse click away. The "ad-hoc" query tool allows for complex queries of the database. This tool allows the user to select the criteria for any type of report, generate it, and output it to an external data base( Excel, Access, etc). Reports also may be output to a printer, Lotus spreadsheets, the resident database or simply as text files. DataLink allows for the full range of data retrieval, data archiving, data editing, calibration reports, alarming, and real time data display. Pre-formatted regulatory reports are standard. The "ad-hoc" report feature is standard. The New Jersey state regulatory reports are automatically produced. Other state reports are in process of development. Also coming soon is the automatic preparation of the new reports required under the "NOX Budget Program". These reports will be transferred to the applicable regulatory agency be electronic means. Environmental Monitoring and Meteorological Studies H2NS Environmental Inc. is pleased to present DataLink/AQM,-RT a truly new concept for environmental monitoring and meteorological studies. DataLink/AQM-RT incorporates the latest technologies while maintaining tradition for the tenured environmental professional. H2NS has added an exciting, new capability, to this proven package of Data Acquisition Software. This package allows for automated and manual polling of an H2NS CPP-3794, plus a variety of other manufacturers data loggers, either by direct connect or telephone modem. In the Real Time mode, operators can view data in a variety of formats with updates as frequent as 10 seconds. Retrieved data is stored in a data base that can be edited and exported to popular spread sheets such as Access? or Excel?. Data analysis includes tabular summary reports with a max-min, interval average and total summary. Presentations include trend charts, bar graphs tabular and graphical reports. Graphical reports include wind rose, pollution rose and 3D graphs. DataLink/AQM-RT takes all the hassle out of configuring the software to match the specific data logger configuration. Using DataLink/AQM-RT you simply connect to a data logger and DataLink-RT commands the logger to download it’s configuration. The configuration is saved as unique to that location. DataLink also allows reset of the logger time to match the computer time or allows the logger to reset the computer time. H2NS Environmental Presents the CPP-4794 - The Next Generation Serial Data Collection The CPP-4794 represents the next generation of data logging and offers serial interfacing to instruments as well as supporting the traditional analog approach using an analog to digital converter. Over a single RS-232 cable, the CPP can collect data, status and control the calibrations of connected instrumentation. This approach simplifies wiring, documentation and increases system reliability. In those instruments that support a time/date download, the CPP keeps the entire system time synchronized. Pass Through to Instruments The CPP-4794 also offers an unabated pass through mode that allows a user to make a direct connection with an instrument that is connected to the CPP, passing signals through the CPP, unabated. This allows manufacturer supplied diagnostic routines to be conducted on instruments from a remote location, e.g., your facility or even the instrument manufacturer’s facility. The CPP continues to collect data from all other connected instrumentation. 12 Independent Serial Ports Up to 12 independent serial ports can be installed in the CPP. One serial port is used for an on site operator, another is used to communicate and transfer data to a central polling facility. The remainder of the serial ports can be used to interface to instrumentation. One of the ports can be used to provide a Modbus output from the CPP, or other special protocols, as needed. Data Storage/Security The battery backed, internal memory in the CPP can store over 3,000 data values for ten channels. For hourly averages, this translates into 3,000 hours of data for ten channels. However, given all that can happen at a remote location such as power surges, brownouts, lightning, and operator mishaps, the CPP also offers data storage on a 64meg, industrial grade, Compact Flash Memory Card. This provides an additional degree of buffering from circumstances that can affect data collected and stored on site. Years of hourly data can be stored on the Compact Flash Memory Card.