A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0-9

Results 1 - 9 Of 9 1

ZANDER Aufbereitungstechnik GmbH
	concept WVModular High end adsorption by means of vacuum regeneration - savings of 25% are possible compared to conventional systems - active heating under vacuum with ambient air - intensive cooling - no purge air, thus pressure build up on the wet side - changeover without dew point peak - standard pressure dew point -25° / -40°C - option: reliable dew points down to -70°C - new function alarm for pressure, temperature, heating, vacuum pump and vessel changeover - standard-capacity of up to 14500 mÂł/h, higher capacities available on request - system options: - pressure dew point control, - isolation (as an option) Drying Technology Customised solutions will finally pay off. We offer highly efficient drying by means of refrigeration dryers, membrane dryers and high end adsorption dryers. Our compressed air dryers are engineered components for complete (holistic) preparation systems, which mostly outperform the requirements regarding their capability, operating reliability and efficiency. ecodry K-MT The little giant... - adsorbs and regenerates at the same time - vessel manufactured in one piece - directly controlled main and exhaust valves - compact non-return valve combination - self-cleaning sieve screens on the wet side - high quality desiccants - including multitronic control system - allows ZANDER 10 minute cycle System supplement: ecodry KA-MT - dryers and cleaners (K-MT has an integrated activated carbon stage) constitute a reliable purification unit - besides drying, the compressed air is cleaned by the activated carbon stage High pressure Filters 25 (362) to 50 bar (735 psig) Filter Series - specially treated high pressure filter housings with a guarantee of 10 years - volume flows from 75 to 2600 mÂł/h - connection sizes from G 1/4 to G 2 - recommended operating temperature: 1,5°C - 80°C - CE-marking in accordance with 97/23/EG for fluid group 2, if applicable no marking due to Art. 3 Para. 3. In order to find out whether filters that are identical in construction are applicable for fluid group 1 please contact us High-performance filtration technology Our goal: Maximum output and security combined with the highest possible efficiency and quality. We offer solutions to most diverse requirements in the field of filtration. Apart from particles of dirt, water and oil vapours, ZANDER filters also eliminate micro-organisms. Our enormous product portfolio has a practically orientated structure and can thus guarantee highly efficient solutions to almost any possible application. Microfilters ZANDER Microfilters stand for premium quality for over 30 years. Due to constantly changing market requirements and application conditions, ZANDER Microfilters are among the worldâs best industry standards today.
ZAPF Wassersysteme GmbH
	Abscheidetechnik Ein einzelner Tropfen Benzin genügt, um 1 m³ Wasser zu verschmutzen. Reines, sauberes Wasser ist eine unserer wichtigsten Lebensgrundlagen. Durch unsere hochtechnisierte Welt ist es vielfachen Gefährdungen wie z.B. der Verunreinigung durch Öle, Benzine und Schmierstoffe, sowie Fette ausgesetzt. Zur Vermeidung von Umweltschäden durch die unkontrollierte Ableitung von ölhaltigen Abwässern müssen wirksame und sichere Methoden der Abscheidetechnik überall dort eingesetzt werden, wo Leichtflüssigkeiten und Fette mit Wasser in Berührung kommen können. ZAPF KLARO GmbH bietet mit seiner Abscheidetechnik nach EN 858 und DIN 1999-100 innovative und sichere Lösungen hierzu Fettabscheider Über die Grundstücksentwässerung und die Kanalisation bis hin zur Kläranlage, stellen Fette und Öle einen gefährlichen Störfaktor dar. Für den Einbau einer Fettabscheideanlage gibt es überzeugende Gründe: Vermeidung von Rohrverstopfungen Verhinderung von Korrosion und Geruchsbildung negative Beeinträchtigung der Kläranlagen. Für alle Betriebe, in denen fetthaltiges Wasser anfällt, ist eine Fettabscheideanlage gesetzlich vorgeschrieben. Kläranlagen In dieser Rubrik finden Sie alle unsere Produkte aus den Bereichen Kläranlagen, Regenwassernutzung und Abscheidetechnik. Alle Produkte der ZAPF KLARO GmbH unterliegen stets den strengsten Qualitätsansprüchen. Für nähere Informationen zu unseren Produkten klicken Sie bitte auf den Produktnavigator am rechten Bildschirmrand. Regenwassernutzung Wasser ist eine der wichtigsten Ressourcen der Erde, ein vernünftiger Umgang mit dem Trinkwasser, das in verschiedenen Regionen immer knapper wird, ist unerlässlich. Der Mensch verbraucht durchschnittlich 140 Liter Trinkwasser pro Tag, doch für rund die Hälfte dieser Wasseranwendungen kann das kostbare Trinkwasser durch Regenwasser ersetzt werden. Unsere Produkte ermöglichen die Regenwassernutzung für Haus und Garten. Davon profitieren Mensch und Umwelt gleichermaßen. Mit Trinkwasser achtsam umzugehen bedeutet nicht nur, die Umwelt zu schützen, sondern auch Geld zu sparen! Aus einer richtig geplanten und erstellten Regenwasseranlage erhält man qualitativ hochwertiges Brauchwasser. Unsere jahrelange Erfahrung hilft Ihnen, die für Sie am besten geeignete Lösung zu finden!
ZARGES GmbH
	Hazardous Goods Strict safety regulations are laid down by law for the packaging and transport of hazardous goods. Hazardous goods may only be transported in packaging that meets these criteria and is approved by the authorities. The requirements in relation to packaging are governed by the Hazardous Goods Directive and other standards. ZARGES has for many years been producing UN-approved packaging in aluminium. This approval relates to composite packaging (Code UN 4B). Z300 Multipurpose ladder A multitude of uses with compact transport dimensions. Can be used as a simple wall ladder with / without support, double ladder can be ascended from both sides, practical working platform. Side rails made from aluminium extruded profiles for maximum stability. Replaceable 2-component plastic end caps ensure positioning without risk of slipping. High-strength ZARGES quality flanged connection between rung and stile. External width of ladder body: 350 mm. Z300 telescopic work platform One platform for different working heights. Original TELESTEPS: Convenient height adjustment by the proven AUTOSTEPS mechanism on guide and slide bushes. Large, checkered standing platform for safe and comfortable working. The right solution when there is not a lot of space. Different heights can be adjusted - for platform heights of 0.50m, 0.68m and 0.88m. When pushed and folded together the platform fits into every luggage compartment. Rungs and stiles made from extruded aluminium sections. Wear-resistant, anodised stiles. Z600 Multipurpose ladder, 3-part One ladder - six functions Top section with parking hooks and locking mechanism. Strong Perlon restraint strap with sewn-in fixing tab. Sturdy, screwed fittings made from extruded section. Optimum guide connection that encompasses the whole stile. Locking mechanism and guides are bolted in so that they can be replaced. High-strength ZARGES quality flanged connection between rung and stile. Replaceable 2-component plastic end caps ensure positioning without risk of slipping and at the same time provide firm seating in the stile. Rungs and stiles made from extruded aluminium sections. Can be used on steps / stairs. Multipurpose ladder with complete equipment. Two rigid locking bars. Optimum stability thanks to extra-wide crosspiece. Guide wheel assembly at top of upper section. Z600 Work platform, folding Top quality for maximum safety. Large step surface (65 cm × 30 cm). 80 mm deep treads with ZARGES Safer Step Technology. Maximum stability thanks to rigid connection on both sides. High-strength ZARGES quality flanged connection between rung and stile. Replaceable 2-component plastic end caps ensure positioning without risk of slipping and at the same time provide firm seating in the stile. Treads and stiles made from extruded aluminium sections. Z600 ZAP work platform, height-adjustable The flexible work platform up to a working height of 5.50 m, compactly collapsible. Large-area work platform 0.50 x 2.00 m or 0.60 x 2.55 m. Peripheral landings for maximum safety. Simple height adjustment according to the self-locking push-up ladder principle, thus different heights can be obtained with only one work platform. Operation of height adjustment by one person. Easily collapsible for transportation and storage. Highly mobile and able to pass through doors when erected and collapsed thanks to rollers (Order No. 53794). Swing-out stabilisers with sturdy height adjusters for stability and for levelling out uneven floor/ground surfaces. No ballast weights are required for indoor use. Two sizes with height adjustment from 1.10 m to 2.50 m or 1.70 m to 3.40 m platform height.
ZAUGG AG EGGIWIL
	Ice mill EG 20 Vario The ZAUGG Ice mills are designed for use on highly iced roads, pavements and open lots. They easily cut their way through up to 10 cm thick ice layers, or can be used to roughen up iced areas making them passable. The cutting width is variable and can be adjusted. NEW: BULLDOGG The Bulldog is the smaller execution of the Snow Beast. The crawler-type snow blower captivates by its innovative technology with high capacity and handling standards. The Bulldog is used for the construction and maintenance of Fun Parks as well as for snow clearing on terraces (mountain restaurants), mountain railways/sport courses, parking lots, sidewalks, etc. The ejection chute is stainless and can be extended for ejecting and loading the snow onto trucks. A snow height of up to 70 cm is not an obstacle for the Bulldog. Snow blower SF 110 The ZAUGG SF 110 is designed for mounting on large vehicles, tractors, Unimogs and loaders with 60 kW output or more. Clearing width up to 260 cm. snow blowers Crawler type snow blowers. Snow plough G40K The G40K is designed for use in tight built-up areas. Because of its low overall height and its arched plastic mouldboard for a better snow flow, the G40K is best used in towns. Equipped with the lateral traversement unit, snow clearing in gyratories and narrow passages becomes possible. With this special unit the plough is centred on the truck and so decreasing the overall width and aiding avoidance of obstacles. Snow plough Vario 4 The Vario 4 is mainly used on motorways and airports for broad snow clearance at different working speeds. The mouldboard form can be hydraulically or mechanically adjusted from the cabin to suit any snow conditions and clearing speed thus enabling proper displacement independent of the depth of the snow. Street sweeper KM 60 This highly manoeuvrable machine can be used in all kinds of situations. The main brush has an infinite hydraulic drive and can be angled up to 30° to either side. Two support wheels are provided with adjustable bearings.
ZÜBLIN Umwelttechnik GmbH
	Combined sewer, Freising (Germany) This combined sewer with a length of 5.7 km was driven through the aquifer using an earth-pressure-balance shield. The reinforced concrete pipes have an internal diameter of up to DN 2200. Cut-off wall at Haveleck, Berlin Installation of a 570 m long and 60 cm thick single-phase cut-off wall for the containment of contamination on an 18,500 m² site located right next to the river Havel. With a max. depth of 54 m, the cut-off wall panels extend 2 m into the brown-coal silt aquiclude. The single-phase cut-off wall covers an area of 26,000 m² Digesters These three egg-shaped, prestressed concrete digesters have a capacity of 16,700 m³ each, making them the largest structures of this type in the world. They have a diameter of 29.4 m and a height of 46.7 m.* Pumped-storage plant, Goldisthal Lignite-fired power stations are difficult to regulate: they supply the same amount of energy around the clock. The surplus electricity generated at night is used by pumped-storage plants to replenish the upper reservoir. During the day, hydropower plants can then supply peak-load electricity to the grid within a matter of seconds. With a total capacity of 1,060 MW, the Goldisthal pumped-storage plant ranks among the largest and technically most advanced plants of this type in Europe. The upper reservoir holds 12 million m³ of water; the machine hall and transformer cavern have a total excavated volume of 185,000 m³. There is a difference in elevation of 300 m between the upper and the lower reservoir
ZÖLLER-KIPPER GmbH
	High Level lift High Level lift system closed refuse collection of domestic waste in 2- or 4-wheeled containers Kurzbeschreibung Qualitätskontrolle fßr Bio-Abfall bereits beim Abfall-Erzeuger Moderne Umwelttechnologie: Mit Sonden an der Hubvorrichtung des Mßllsammelfahrzeuges werden Biotonnen noch vor ihrer Entleerung auf Schad- und StÜrstoffe untersucht. Dies geschieht automatisch und ohne Zeitverlust. Optisch und akustisch wird in Sekundenschnelle angezeigt
The Zenit Group
	BlueBOX 250-400 • 250 litre version for one pump and 400 litre version for two pumps • can be installed directly coupled or with coupling device • walk-over cover • O-ring seal between tank and cover • simplified intake pipeline installation with seal • airtight cable gland seals • integral lifting handle • fitted for emergency emptying using a tap or auxiliary pump • patented cable gland allowing easy pump removal for any maintenance work DG Blue Electromechanical assembly in EN-GJL-250 cast iron, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing. DR Blue Electromechanical assembly in EN-GJL-250 cast iron, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing. OXYPLATE 9-12 Disc-shaped diffusers having elastomer membrane with tiny holes for application in water treatment processes in reactors with continuous or intermittent aeration, especially recommended for high-efficiency permanent installations. The quality, design and membrane hole size ensure unbeatable efficiency in terms of the ideal oxygen transfer-pressure drop balance.
Zeppelin Baumaschinen
	Fork-Lift Trucks Here Zeppelin offers a complete range of products, from small lift truck to big 50-ton stacker, all built by Hyster. Hyster Fork-Lift Trucks From 1 January 2002, Zeppelin is taking over the sale of Hyster fork-lift trucks for Germany, Austria and all countries with Zeppelin branches. Zeppelin will also be selling the Hyster range in Hungary, Poland, Russia and central Asia. Hyster is the world's only fork-lift maker with a complete range, from small lift trucks to 50 ton models for container handling. Leading the field in the USA and near the top worldwide too, Hyster enjoys an enviable reputation for excellent product quality as well as for first-class service and spare part supply Silos and Systems This corporate unit concentrates on the manufacture of silos and turnkey plants for the chemical and petrochemical industries. Wheeled loaders Wheeled loaders
Zirox Sensoren & Elektronik GmbH
	Electronic Unit E2000 General Information The electronic unit E2000 is a comfortable device for the using of ZIROX® oxygen probes. The signals of ZIROX® probes will be recorded with the E2000, processed to the oxygen concentration (normally in Vol.-%) according to the NERNST equation and given out by standard interfaces. The electronic unit E2000 supplies the probe with reference air via internal pump. Additionally the E2000 realises the power supply and the heating control for heated ZIROX® probes. Furthermore the probes will be monitored by the E2000 via cyclic measurements of the cell resistance. An error message will given out as necessary. The user can program two limit values (output via relay). In incomplete burned gases (reducing conditions) more values can be calculated (air factor , dew point, H2O/H2-Ratio, CO2/CO-Ratio, c(CO2) and c(H2O) in the water gas equilibrium. Precondition: known fuel gas composition, e.g. C/H-Ratio If requested the E2000 can be delivered with auto calibration function. Features Signal processing and display of ZIROX® probes measuring values Calibration and monitoring function for ZIROX® probes Measuring value output via standard interfaces Process monitoring via standard interfaces Customized solutions Auto calibration function (Option) Flue gas probes General Information Zirox flue gas probes are rugged sensors, which serve for λ-Determination in power and heat plants as well as for Measurement of oxygen partial pressure of furnace atmospheres. The probes are calibration, drift- and maintenance-free. At measurements in reducing atmospheres no falsification of gas composition occurs by measuring gas cooling in a suction line. The working temperature will be ensured by integrated heater. The using of high quality components and materials guarantees a high long term stability. Applications Flue gas measurements in power plants (TÜV-Approval according to "TA Luft, 13. und 17. BImSchV") Process gas measurements High temperature probes General Information The ZIROX® high temperature probe KS20 has been developed especially for using under extrem temperature conditions up to 1450 °C. With the KS20 the logging of the oxygen partial pressure direct in the burning chamber is possible. The KS20 is calibration, drift- and maintenance-free. At measurements in reducing atmospheres no falsification of gas composition occurs by measuring gas cooling in a suction line. The using of high quality components and materials guarantees a high long term stability. If the fuel gas composition is known it is possible to calculate the air factor λ, the CO-, CO2-, H2- and the H2O- concentration. This values can be given out by external electronic units (e.g. ZIROX® electronic unit E2000). The KS20 serves for process control and combustion optimisation (TÜV-Approval according to "TA Luft, 13. und 17. BImSchV") in power and heat plants as well as in incineration plants. It is also part of control for oxidising and reducing furnace gases in the ceramic industry. Applications Flue gas measurements in the high temperature range Furnace gas controlling in the ceramic industry Measurements in protective and inert gases High-Precision Oxygen measuring Device SGM5 General Information The ZIROX® high temperature probe KS20 has been developed especially for using under extrem temperature conditions up to 1450 °C. With the KS20 the logging of the oxygen partial pressure direct in the burning chamber is possible. The KS20 is calibration, drift- and maintenance-free. At measurements in reducing atmospheres no falsification of gas composition occurs by measuring gas cooling in a suction line. The using of high quality components and materials guarantees a high long term stability. If the fuel gas composition is known it is possible to calculate the air factor λ, the CO-, CO2-, H2- and the H2O- concentration. This values can be given out by external electronic units (e.g. ZIROX® electronic unit E2000). The KS20 serves for process control and combustion optimisation (TÜV-Approval according to "TA Luft, 13. und 17. BImSchV") in power and heat plants as well as in incineration plants. It is also part of control for oxidising and reducing furnace gases in the ceramic industry. Applications Flue gas measurements in the high temperature range Furnace gas controlling in the ceramic industry Measurements in protective and inert gases Measuring Cells For customers with own periphery ZIROX offers real OEM zirconia cells. But the relevant parameters must be coordinated exactly. Therefore please contact our consulting staff. Miniature probes General Information Potentiometric oxygen probes, which have been developed for the exhaust gas measurements in motor vehicles (λ-probes), will be frequently used in industrial equipments. According to the construction these probes have any disadvantages: because of the uncontrolled heating (steady working voltage) and ceramic cover films of the electrodes (which promote the diffusion of special gas components) important measuring errors can result. The SS27 with controlled heating and integrated primarily electronic has a great accuracy at comparatively lower costs. The main part is the approved ZIROX potentiometric zirconia based solid electrolyte cell (drift-, calibration- and maintenance-free). The using of high quality components and materials guarantees a high long term stability. Applications Oxygen measurements in protective gases Exhaust gas measurements in large-scale engines Control optimisation in firing equipments Furnace gas measurements in heat treatment equipments Optimisation of incineration plants monitoring of industrial processes under protective or inert gas atmospheres O2-Measuring Device SGM7 General Information For an optimal quality and process protection the avoidance of oxygen, also as traces, is necessary in many technological applications. Not least by progressive introduction of quality assurance systems, e.g. according to ISO 9000, a constant monitoring and documentation of quality parameters becomes more important. The compact oxygen measuring device SGM7 is based on the approved, drift-, calibration- and maintenance-free ZIROX® zirconia technique. It contains the measuring cell as well the electronic for cell heating control, flow monitoring, integrated pump and signal processing. Via microprocessor the measuring cell signal will be processed according to the NERNST equation. The requested value will be given out by display and analog current signal. (Option: digital interface RS232 with software). In the SGM7 the measuring cell will be monitored simultaneously. In the case of error a alarm signal will be generated. Applications Protective gas monitoring in the food industry Measurements in CO2 equipments of breweries Protective gas monitoring in the soldering and welding technology Production processes in the microelectronic Oxygen Measuring Module ZR4 General Information For an optimal quality and process protection the avoidance of oxygen, also as traces, is necessary in many technological applications. Not least by progressive introduction of quality assurance systems, e.g. according to ISO 9000, a constant monitoring and documentation of quality parameters becomes more important. The oxygen measuring module ZR4 based on the approved zirconia technology. It serves for the continuous measurement of oxygen concentration in industry and laboratory gases and for the monitoring of protective gases. Deviations of the oxygen concentration from setpoints can be signalised, the procedure of special production processes under inert gas can be monitored by the ZR4-Module. Applications Protective gas Monitoring in food processing, i.e. in packaging Protective gas monitoring in technological processes, i.e. soldering, welding Monitoring tasks in microelectronic manufactures Monitoring of protective and inert gases in surface treatment processes