A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0-9

Results 1 - 10 Of 21 1 2 3  Next › 

Labio Test
	Biological solutions Biological solutions based on a wide range of high quality selected efficient micro-organisms and enzymes, which have not been genetically modified, can effectively degrade various substances, while reducing polluting loads and olfactive impacts of biological matrixes to be treated. These solutions are particularly suitable for the cleaning and disinfecting of waste collection bins and the reclamation of grounds that have been polluted by hydrocarbons. Labiotest activities in this field require an initial chemical analysis of matrixes to be degraded, in order to select the most effective micro-organisms, followed by laboratory tests and finally by a treatment on site. BIOLOGICAL TREATMENTS BIOLOGICAL TREATMENTS FILTERING SYSTEMS FILTERING SYSTEMS osmogenic barrier The osmogenic barrier is perfect to solve problems of smells coming out from diffused sources: specific natural products properly sprayed can stop malodorous molecules by interfering with their trajectory. Such a barrier is based on micelle-like nano-aggregates inside which malodorous molecules get trapped, due to water repellent types of forces. Through a carefully designed distribution of spraying nozzles, fed by specific spraying devices specifically designed and manufactured by the company technicians, Labiotest exclusive formulas ensure the necessary process to reduce odour concentration(Cod) at an efficiency rate of 90%. OSMOGENIC BARRIER OSMOGENIC BARRIER
Linn High Therm GmbH
	3 pcs. Hydrogen soldering unit WL100 3件。氢焊接机WL100 为针点钎焊，钎焊，熔炼，焊接，热处理。 工厂新的。 车用汽油行驶约。 100升/小时，230 V/50 Hz的。 GHV-150-300-1800-VAC 熔于熔池测量的物理参数和石墨炉炉渣熔化炉，石墨保温。真空（5 × 10-2毫巴）和保护气操作（氩气，氮气）。 炉用石墨结晶石墨加热器和绝缘测量的物理参数熔池中的熔融结晶。 New powerful divices 前者由固态高频属高千卡发电机系列是新的功能强大的设备所取代 New tube furnace: FRH-350/600/1100 管状炉保护气体和真空下快速循环时间。 对于热和退火工艺的钎焊粉，治疗。与气密端盖插入管安排可移位的框架上滑动。 选项：气体输送装置，燃烧过的火焰监测仪，几个程序控制器，由尾随热电偶温度控制等
LJM Industri Lind Jensens Maskinfabrik
	OMDR This is a complete new type of agitator from LJM manufactured entirely from stainless steel. It can be used in larger tanks where you need to achieve good mixing. This is achieved with a larger diameter blade running at a slower speed. The mixer is very good in aggressive media, for example in industry or wastewater plant where the PH-value is fairly high/low. Fitted with an 8-pole motor and direct drive, giving a propeller speed of 700-750 RPM. It is fitted with temperature and leakage control both in the motor and oil chamber. OMDR is equiped with motor bracket and trap clamp, as all our other mixers, and can easily be installed on an 80 or 100 mm. square mast. The OMDR mixer can be supplied in 1,5 and 2,5 kW – later also 5,5 kW – and is fitted with 2-bladed propeller in aluminium-bronze. The form of the propeller gives an optimum mixing with low energy consumption MDDR Mixer MDDR is the new line of LJM-mixers manufactured completely in stainless steel. It can be used in smaller tanks where you need a very good mixing, or in aggressive media, for example in industry or waste water plants where the PH-value is fairly high/low. The mixer can, as with our standard cast iron MDD-mixer, be easily installed on a 60 or 80 mm square mast or as fixed mixer in the bottom of the tank. The optimum form of the propeller gives a very concentrated streaming and can reach a long distance. The result is a very effective mixing with low energy consumption. The MDDR mixer can be supplied in the same size as the MDD – from 1,1 to 3,0 kW – and is also fitted with 2-bladed propeller along with temperature and leakage control. The motor bracket and trap clamp are also in stainless steel. MDDR are available in the following types: MRPG - Medium Flowmaker LJM Industi has a very compeditive product programme in medium flowmakers in the range of 1,1 kW to 5,5 kW motors. The MRPG Flowmaker is built with "standard" 4-pole motors and have a very reliable and strong planetary gear - which is the best gear type at all. Furthermore the Flowmaker have long life high quality roller bearing on the propeller shaft - life time above 100,000 working hours. The flowmaker type MRPG is protected via 3 pcs. Klixon-bimetallic sensors and leak control in the oil chamber. The LJM Industri Flowmaker type MRPG is as standard mounted with a 3-bladed stainless steel (AISI 316) propeller and with a stainless steel trap clamp RCDD - Recirculationpumps LJM Industi has a product programme in recirculationpumps which are very efficient and fast for smaller water volumes by relatively small elevation hights. The RCDD and RCPG recirculation pumps are built with "standard" 4-pole motors and have a very reliable and strong planetary gear - which is the best gear type at all. Furthermore the recirculation pumps have long life high quality roller bearings on the propeller shafts - life time above 100,000 working hours. The recirculation pumpw type RCDD and RCPG is protected via 3 pcs. Klixon-bimetallic sensors and leak control in the oil chamber. The LJM Industri recirculation pump types RCDD and RCPG are as standard mounted with a 3-bladed stainless steel (AISI 316) propeller and with a stainless steel trap clamp.
LOEMI GmbH
	Units for Metal Swarf and Cooling Lubricant Recycling Units for Metal Swarf and Cooling Lubricant Recycling LÖMI Units Metal Swarf and Cooling Lubricant Recycling Units Models LRA-150 E and SEA-2400 / LRA-3000 LRA-150 E Photo: © IWF 341-99-00 Key Design Features: Fully automatic process, 24 hours Vessel made of stainless steel Profile base frame and sheet metal covering made of anodized aluminium Safety closure with O-ring seal Integrated -proof vacuum unit Integrated -proof thermo-oil heating Explosion-proof according to ATEX-Directive 94/9/EC (ATEX 95): II 2 G c T3 Switch cabinet with Programmable Logic Controller (PLC), display- and operating-terminal Including cable loom from unit to switch cabinet Options (Examples): Remote maintenance via modem Higher protection according to ATEX-Directive 94/9/EC (ATEX 95): II 1/2 G c T3 -proof vessel lighting fixture Collecting tray with grating
LOFT Anlagenbau und Beratung GmbH
	control - visualization system solutions for the sewage processing integrate individually the periphery made to measure on the customer. The business is fully automated and interpreted for a man loose business. Representation is made quite especially every control and process picture for the respective difficulties. We deliver, assemble and control everything you need in the environment of your plant. FINAL CONCENTRATOR HYBRID The Final Concentrator Hybrid FCH 30 is a brand new technology developed and applied for patent by LOFT Anlagenbau und Beratung GmbH in spring 2003. In order to achieve maximum reduction of the residue (concentrate) produced during the evaporation process a Final Concentrator Hybrid (FCH) can be used in a second hybrid step. As the whole energy and media is provided by the main plant, the FCH does only work in connection with a DESTIMATÂŽ Low Energy evaporation plant. The innovative aspects for the customer: > Disposal costs are reduced by 50 > No additional energy consumption > Pay back period between 6 and 18 months The economic efficiency of the evaporation process is thereby effectively increased in comparison to normal evaporation processes or alternative technologies. A couple of LOFT FINAL CONCENTRATOR HYBRID FCH have already been successfully installed in various cases and fulfill the high expectations of our customer. In each case the capacity of the FCH is individually adapted to the demanded capacity
Lonkwitz Anlagenbau
	ASPIROFILTER Ten models to give the perfect response to every requirement. Throughput from 800 to 2800mÂł/h to provide the right solution for everything from small lathes to huge machining centres. DARWIN Air filter for mists and vapours from soluble or neat oil for machine tools. The DARWIN series, patented and available in 4 models, covers throughput range of 600 to 3.000 mÂł/h. This means that it can cope with widely differing applications, from small lathes to grinding machines or complex machining centres. Darwin with turbine (T): filtration of air containing soluble oil mist with the presence of heavy particulate. Darwin with single-centrifuge (M): filtration of air containing mists of soluble and neat oils with presence of small quantities of particulate. Darwin with double-centrifuge (D): filtration of air containing mists and vapours of soluble and neat oil with presence of small quantities of particulate GEMINI Air filter for oilmist, micro-mist, vapours and smokes for machine tools. Gemini is available in 3 sizes, 700 to 2.000 mÂł/h, with 3 standard configurations each (filtration efficiencies from < 95% to < 99,95%). Gemini has a particular patented design, which makes maintenance operations and filters replacement very easy and represents the perfect solution for all cases where the customer in little spaces has the need of both a pre and post-filtration. MODULAR FILTERS All models in the DARWIN and ASPIROFILTER series can be coupled to special units that provide real and proper superfiltration. Their use permits many permutations and gives performance levels of up to 99.7% efficiency. These special units can be added at any time, even after the installation of the air filter. Pre-Filters GUARD: is a two stage (metal and synthetic) pre-filter for coarser particles and significant quantities of metal dust and oil mist. Post-Filters SYNTHESIS: an electrostatic post-filter for eliminating oil mist particles, smoke and micromists. CLIPPER/NITOR: is a glass fibre post-filter for the absolute filtration. MICROFILTER: is an activated carbon post-filter for unpleasant or noxious smells. NEWTON Newton is a system for the filtration of air in the workplace, capable of eliminating oil mist and smoke caused by a variety of metal machining applications, specifically designed for end users and machine tools manufacturers for the metal working industry. Available into two "sizes", Newton 3, 3.000 mÂł/h and Newton 6, 6.000 mÂł/h, is the ideal answer for the Equipment of Oversize machine tools, or the realization of Centralized Systems, combining more units together. SIRIUS The Air Filtration Range is completed with a system tailor-made for spark erosion. SIRIUS ER 800 is a filter with a throughput of 800mÂł/h, designed specifically for the emissions from this type of machining. Equipped with no less than two pre-filtration stages (metallic and fabric) and four activated carbon cells, SIRIUS represents the most comprehensive solution to the particular characteristics of the fumes given off by dielectric fluids used in spark erosion machining.
LOSMA S.p.A
	AIR FILTERS For the air cleaning we offer many different models of mist collectors: centrifugal (in the versions turbine, single centrifuge and double centrifuge), static filters and specific units for very high throughputs or centralized systems. All the models are ready for being arranged with a range width of modules of pre and after-filtration therefore to resolve in specific way any type of problem. Our mist collectors can be directly installed on the machine tools. They remove the polluting from the source, and can easy be moved, and used again on other machines or switched off in case they are not used COOLANT FILTERS The Losma Liquid Filtration Range is made up of various types of filter to cope with all eventualities. Losma’s expertise in this area shows in all its products, from the simplest of cloth filters to more complex integrated systems with several filtration stages. This know-how also means that tailor-made solutions and one-off designs can be proposed for special customer requirements. The Liquid Filtration Range comprises seven product lines, DETEX, DEMAG, DECOM, RIVER, SKIM; SPRING and MASTER Series which can all be equipped with refrigeration systems to order.
LTA Lufttechnik GmbH
	Air suction and cleaning Air suction and cleaning are made at source. Exhaust air Exhaust air coming from a group of machines is collected at one point where it is then decontaminated. Piping Design and installation of complete piping systems The exhaust air is collected via a tube The exhaust air is collected via a tube which conveys it to a central device where it's purified
LUKAS Hydraulik GmbH
	Concrete Crusher This compact tool is best suited to reconstruction projects in commercial buildings and for building demolition. It is designed to crush concrete and cut reinforcing rods with different contact points on the same tool arm. Hydraulic cutters Hydraulic cutters Lifting Sets With the LUKAS lifting set H 1 all kind of lifting and stabilization work can be carried out quickly and safely. The cylinders are made of high-strength light metal. Their lifting forces are exceeding DIN requirement by 5 tons Rescue Equipment Tests on modern vehicle construction have shown that the new STREAMLINETechnology cutters are not only capable of cutting the hardest materials found today without any difficulty, they also possess enough power to potentially handle new challenges in the future! The advanced design of these cutters offer impressive operating speeds and large cutter opening’s to provide maximum efficiency on any rescue scene. Through extreme material strength STREAMLINETechnology cutters provide maximum durability and prevention of blades breakings. When uncompromising quality and power are demanded, STREAMLINETechnology cutters are the reliable choice for use in any rescue operation Rescue Ram For pushing operations and removing of obstacles, the new STREAMLINETechnology offers rescue rams in different variations. This includes single-stage standard rams and two and three stage telescoping rams. These rams were designed to offer a maximum of pushing/pulling distance using the lowest feasible size and weight. The patented star grip control allows precise operation of the rescue ram in any position without distortion of the wrist. Telescopic cylinders. Telescopic cylinders.
LINDE-KCA-DRESDEN GMBH
	Air Separation Plants (cryogenic) Linde-KCA-Dresden delivers in cooperation with Linde Engineering Munich cryogenic air separation plants for Middle and Eastern Europe as well as for countries of CIS. Linde has a leading position in the world market for delivery of turn-key air separation plants. With the invention of the process for the liquefaction of atmospheric air and other gases in 1895 our founder Dr. Carl von Linde initiated the development of the cryogenic industry. Since then Linde has continued the chain of successful inventions and improvements in air separation. Over 2,700 air separation plants all over the world and the permanent presentation of top performance bear witness to the outstanding market position of Linde in this field of technology as well as to capacity, availability and efficiency of plants as well as quality of products and profitability. Biotechnological Plants Linde-KCA-Dresden GmbH is one of the leading companies for engineering and construction of biotechnological and pharmaceutical plants, and in constructing plants in the range of Life Science Industry Linde-KCA-Dresden GmbH assures worldwide accepted competence and profound know-how relating to various plant types. Besides services for engineering and implementation of turnkey facilities, Linde-KCA-Dresden GmbH has gained valuable experience in project definition and conceptual design of plants and facilities as well as in planning according to GMP (Good Manufacturing Practice, PDF, 125Kb) in compliance with EU and FDA standards. Worldwide services for biotechnological and pharmaceutical plants are performed by our offices in Dresden and LĂśrrach, located in region Basel in the border triangle Switzerland, Germany and France. Contact: lkca.biotech@linde-kca.com Chemical and Gas Plants One of the fields in which we have long years of experience is the planning and construction of complex chemical and gas plants. Linde-KCA has acquired decades of valuable know-how, from which you as our customer benefit at every stage of your project. Unrestricted choice of techniques â whether branded, third-party or Linde licenses â ensures maximum flexibility. When you work with Linde-KCA, your choice of engineering contractor is no longer dictated by technology, but only by your goal: maximum efficiency, no compromises. Our broad scope gives you numerous models for successful collaboration, ranging from gas separation and purification technologies to chemical and petrochemical plants. We have special skills when it comes to polymers, with a focus on polyethylene and polypropylene plants. New Construction, Modernization, Maintenance. The reference plants we have built offer a compelling impression of our companyâs performance. They include new turnkey plants as well as the revamping of existing production complexes â yet another economically sensible option for taking advantage of our expertise. Being on the cutting edge of technology means knowing how to leverage optimization potential in older plants as well. Here in particular the advantages of a long-term collaboration with Linde-KCA emerge. We know our clientsâ plants like no other, which allows us to develop modifications or complementary components at any time. â Off the cuff,â as it were â without lengthy training periods. Linde quality is guaranteed. Always. All-round Service. Beyond this, we offer you all services needed in the engineering of chemical plants. Take advantage of our know-how for feasibility studies. Use Linde-KCA to find the perfect comprehensive concept for your special needs. Or leave time-consuming approval proceedings to us: We compile all the documentation you need for approval from the authorities and draw up all the necessary security reports and concepts. For international projects, we are also able to organize collaboration with local partners if necessary. Count on Linde-KCA to get the chemistry right â in every respect. Petrochemical Plants Petrochemical Plants are one of our main emphasis of our scope of supply and delivery. Besides the polyolefin plants which are presented separately we would like to point out ethylene glycol plants, plants for production of linear alpha olefins and modernization of ethylene plants. We are carrying out the complete scope of engineering service up to the turnkey erection of a wide range of petrochemical plants on the basis of Licensor’s know-how. Together with Linde Engineering Munich we are in the position to plan and deliver complete petrochemical complexes including primary conversion of petrochemical raw materials, production of ethylene and polypropylene as well as downstream plants for production of saleable intermediate and final goods.