Calmaster

Calmaster has been introduced in response to demands from the water industry for traceable in-situ flow meter verification. Calmaster performs a complex series of tests, which ensure correct functionality and calibration of the flow meter. A simple to follow Windows interface guides the user through the automated series of tests. On completion a certificate is produced to comply with regulatory requirements. Calmaster can be used on existing Magmaster installations but with a reduce accuracy. Magmaster with a factory fingerprint will be given a certificate of 1% existing Magmasters without a factory fingerprint will be given a 2% certificate. Verification accuracy +/- 1% Fully portable battery operated hardware Help desk support at Calmaster@gb.abb.com

FCU200-T (SensyCal-T)

The FCU200-T (SensyCal T) is a two-channel energy, mass flow and volume counter. The device is designed to convert either direct current to a proportional pulse frequency or a proportional pulse frequency to a direct current. The following process signals can be connected on device 2 active current signals or 2 active pulse/frequency signals 2pulse output Graphic display with background light. The key day function, data logger and the MBUS, MODBUS and Profibus (over converter) communications are for further processing.

Oxygen and Combustibles Analyzer

The Type SMA Smart Analyzer 90 is a microprocessor based industrial grade combustion analyzer that continuously samples and analyzes industrial flue gases (oxygen only or optional oxygen and combustibles).The analyzer is designed for use on gas, oil or coal fired combustion processes and has a high temperature operating range.Typical applications include those found in the utility and petrochemical industries.

Sensyflow FMT200-ECO2

Sensyflow FMT200-ECO2 is a very compact and extremely dynamic mass flow meter for air. It offers a direct mass or standard volume flow measurement in pneumatic applications, e.g. in paint robot control. A multi-variable connection system makes the Sensyflow FMT200-ECO2 easy to install in many different tubes or pipes. Analog and digital output signals allow for flexible signal processing. Compact design (IF Design award) Variable process adapters: tubes, threads, ISO-KF flanges DN25 Variable, adjustable output signals Measuring range 1..100 kg/h (=12....1250 l /min) Serial port RS 232

Variable Area Flowmeter VA Master FAM540

The flowmeter operation is based on the variable area principle. They can be utilized for measuring the flow of liquids, steam and gases, especially when aggressive or opaque fluids are to be metered. They are indispensable where high pressure and/or high temperature operating conditions exist. The stainless steel primaries as well as the PTFE liner primaries are proven in many applications even under hardest conditions. Primary instrument designs: FAM541 Standard-line with flange connections FAM544 Hygienic design FAM545 with PTFE-liner for aggressive fluids FAM546 with Steam jacket for temperature sensitve fluids All devices are available as analog indicator with or without alarms as well as electronic transmitter with 4-20 mA , HART and NAMUR contact outputs and optionally with a graphical display. They can be used in all hazardous areas in flameproof, intrinsic safety or non sparking design.