In order to wrap a square bale or a cube, it needs to rotate the bale via two axis.

Different to other wrapping systems the
ROTOWRAP machines do these two rotations at the same time, which increases the throughput vastly.

The rotation of the bale on the oscillation rollers is smooth, exact and controlled and even with loose or weak bales it is possible without loss.

The wrapping machine is placed in line
directly behind the baler. When the bale
is pushed by the baler via a ramp forward far enough, the bale is recognizes and the automatic cycle begins.

The transportsystem brings the bale into the wrapperunit between the oscillation rollers which lift the bale into the wrapping position and wrapping starts. The rollers rotates the bale around its horizontal axle and the
wrapping arm with 2 film rolls of 750 mm wide film is rotating around the bale.

These rotations are exact and relative to each other to get the correct amount of film on every place of the bale. According to special circumstances or customer needs, there are plenty of variations to adjust overlap and number of layers to bring as much film as necessary and as less film as possible to the bale.

When the wrapping is finished the film is cut by a cut & tie system prepared for the next bale.

This system saves film. The next step brings the machine back to the conveyor system which transports the bale to the collecting conveyor.

From here it can be taken away by forklift.