Coal Fire Detection

Coal Pile Fire Detector Continuous Fire Detection in Coal Stockpiles Storing coal in large piles has the inherent risk of spontaneous combustion. There are many industry guidelines to the best method for storing coal in piles. These guidelines include avoidance of spontaneous combustion with regard to pile angles, compression and surface smoothing. Even strict adherence to these guidelines (particularly with the more volatile coals) may in some circumstances not be enough. An early warning system to prevent the onset of fire remains the best and most reliable solution. Features and Benefits Easy Hotspot detection using thermographic image Rapid alarm to initiate preventive action to avoid fire Large area measurement - ideal for large stockpiles and yards Straightforward installation and fully automatic operation Minimal maintenance Proven solution based upon years of experience Continuous Thermographic Monitoring Where a storage facility is large and difficult to access, a continuous and fully automatic monitoring device is the only option. A fixed thermal imaging system located at a suitable viewing point can successfully monitor over a large area, and importantly detect hot spots. A scanning pan-and-tilt unit adds even greater flexibility to cover a larger area. Preventive Action The fixed thermal monitoring system provides a clear visible display (on a remote PC), and alarm outputs when hot spots are detected. Alarms will trigger action by plant personnel to prevent a major onset of fire - importantly, the success of these actions can be immediately assessed by checking the real-time thermal image. Control, Analysis and Alarm functions The thermal imaging system can be remotely setup and controlled via a PC. Comprehensive image analysis software enables a temperature range to be set to best indicate any hotspots. Alarms can be set to trigger at specific thresholds or monitor specific areas (e.g. high risk) within the stockyard. All coal pile fire detector systems are designed to meet the exact needs of the individual stockyard.

flue gas zirconia oxygen analyser

land genesis stand alone flue gas zirconia oxygen analyser

Portable Gas Analyser

Combustion and Stack Emissions Monitoring The Lancom III is a compact, portable combustion and emissions analyser for checking or testing a boiler system or pollutant process. What happens when you drop a Lancom III ? . . . see the video to find out It forms part of the Lancom portable gas analyser range , which includes the Model 220, a sulphuric acid dewpoint temperature and SO3 analyser. The Lancom III is now firmly established at the forefront of portable gas analyser technology. It has the capability to monitor up to 9 different gases, and a total of 17 measurement parameters simultaneously. The Lancom III offers the best accuracy available from a portable gas analyser, achieved by using an advanced sample conditioning system. It has the features and options you would expect from a leading gas analyser, plus many which single it out as being the most robust, versatile and complete portable gas analyzer currently available. Gases Measured Carbon Monoxide (CO low range) Carbon Monoxide (CO high range) Carbon Monoxide (Hydrogen compensated) Oxygen (O2) Carbon Dioxide (CO2) Nitric Oxide (NO) Nitrogen Dioxide (NO2) Sulphur Dioxide (SO2) Hydrogen Sulphide (H2S) Hydrocarbons (CxHy) Nitric Oxides (NOx) - calculated where NO2 sensor not fitted

Series 9000 Carbon Monoxide Monitor

Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler system. Product Range Model 9100 Carbon Monoxide Monitor Model 9200 MkII High Performance Carbon Monoxide Monitor Features and Benefits Direct continuous measurement of Carbon Monoxide True representative measurement - reading averaged across entire duct Improved combustion control and efficiency savings Low running and maintenance cost High reliability - robust design Simple installation - advanced alignment features Over 20 years of experience in carbon monoxide monitoring - 4th generation product The 9200 MkII has all the facilities of the 9100 with the addition of: Clear stack, open path gas calibration Automatic cell leak detection 4 gas cell, TUV approved measurement technique Automatic duct pressure correction

Stack Gas Emissions Analyser

The FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of up to 7 pollutant gases in a single compact unit. FGAII gas analysers carry a wide range of compliance and performance approvals including those from the US-EPA, UK MCERTS and German TÜV. LAND’s measurement technique ensures stable long-term operation with high accuracy and very low drift. Engineered for ease of maintenance and packaged for the industrial environment, FGAII stack gas emissions analysers are simple to install and trouble-free in operation.

Ultra-low level Dust Emissions Compliance Monitor

Model 4500 Premier The Model 4500 Premier is a dust emissions compliance monitor. It is for use on all industrial applications, especially where dust emission levels are very low, typically less than 50mg/m³, and opacity is less than 10%. Key Features Ultra-low level measurement - 0 to 10mg/m³ dust High accuracy and repeatability - ±0.5% opacity accuracy This monitor carries a wide range of compliance and performance approvals including those from the US-EPA, UK MCERTS and German TÜV. It can report data as either opacity, dust density or optical density. There are also a large number of options to ensure optimum performance in specific plant operating conditions.